Hello,
We have a Mazak V-10 with an M32 controller, and have been trying to sort out sending programs to and from the machine to a PC. We are close, but not there yet. The machine alarms are now gone, but we have a "DATA I/O BUSY" message. We are using Cimco software for the PC side. All we wish to do is transfer EIA programs back and forth. We are using CMT for the transfers. There have been many cable configurations tried, but the one we have now shows no "mis-connected " errors, so I have to think that we finally have the cable right. The parameters have been changing according to Mazak or Cimco, but still not able to send or receive. I am missing something! Any help would be appreciated!
Fred4936