how to disable tool change option Fanuc Om-C????
i have problem in my machine in tool change and i need to disable tool change from parameter
how to disable tool change option Fanuc Om-C????
i have problem in my machine in tool change and i need to disable tool change from parameter
؟؟؟
any help plllllllllllz
Well you could just never call an M6, but if you're trying to use existing programming that has M6's in it, either modify your Tool changer program. (potentially program 9001) and remove everything but M99 out of it. (Save a backup first.)
That or look at your parameters 230 to 242 and assign M6 to any one of those that is not in use. Create the program and have the only thing in it be M99.
The control will try there first before going after a real M6 tool change and cause the real M6 to be skipped over.
Pretty sure this will work.
It will not disable it, only bypass it. You only need to make one of those parameters 6, not all. Then you need to create a program using the proper program number that you assigned 6 to, and save it on the control. It should look like this.
Parameter 242 =6
%
O9003 (TOOL CHANGE BYPASS)
G53
G53
M99
%
If 9003 is used by something else, pick a different parameter and program number.
I added a couple G53's to give it some body and stop it from looking ahead. May not need the G53's.
What would be the problem of rotating the carousel one time after homing? Why is it even asking for that?
Curious why you don't want to use the tool changer. Can't imagine living without one.
Yes all that is the easy way to do it, but this isn't the first person I've seen lately wanting something like this. Seems nobody either wants to or has the ability to modify a Post or Program manually. Even though they're asking the machine to forget about half of its functions, they still want it done without any personal intervention. Go figure. Really... the time it would take to modify programs would be almost nothing. A couple text based Find & Replaces and that's it.
thanks all but i need to tell you some information to get the proper solution
my machine batteries was low and all param was lost
and i have not backup
i make all param to mdi and move the x y z
and input some of diagnostic param
now when i make homing after the x y z home
this msg appear "rotate tool drum first"
i need to solve this problem ( knowing that the motor of magazine not working , and the machine from 1 year was working well in same case of this motor )
well the problem should not be so complicated to trace
First of all the Fanuc 0-MC model let you see the ladder logic if the parameter 60.2 is enabled for ladder display
next ,from my experience with so many machines,i saw that the alarms logic are created at the end of the ladder logic so you could start bu tracing the alarm from the bottom of the ladder logic
if you have a number on this alarm just look from the bottom what line is active on the ladder when you have alarm on screen and what line goes down when you hit reset and the alarm dissapear
in this way you can trace the line taht generates the alarm,i know ,need some time but you can do it
after you find the line in ladder that generated the alarm,look what inputs are there,like X,i assume the alarm is generated by a senzor that needs to be read or a combination of the sensors
when you find the X inputs,you need to look in the electrical dagram ,what means that inputby name,eg:atc sensor home or whatever
Good luck
PS:make photos of all pages from ladder and send to me at:[email protected] and i will have a look when i have time
i knwo will be like 80 -90 photos but if you do not have it printed is the only way