Is there a way to save a operations and then import and apply to the feature you want to machine?
The operation would consist of spot drill, drill, rough mill and finish mill.
Will there be hot keys that you can assign to featurecam in the near future?
Thank You
Thread: operation
Results 1 to 2 of 2
-
10-30-2007, 01:29 AM #1
Registered
- Join Date
- Nov 2005
- Posts
- 244
operation
-
11-28-2007, 05:07 PM #2
Registered
- Join Date
- Jun 2005
- Posts
- 69
look into using the "part library" in your help section.
Reply With QuoteSimilar Threads
-
102 Mis Operation
By mattme in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 07-03-2007, 05:48 PM -
Remote operation
By becikeja in forum Machines running Mach SoftwareReplies: 0Last Post: 06-08-2007, 01:58 AM -
5T operation/programming
By John3 in forum FanucReplies: 3Last Post: 04-04-2007, 03:06 PM -
At last! First CNC Router in operation
By cncadmin in forum DIY CNC Router Table MachinesReplies: 0Last Post: 11-27-2006, 05:00 PM -
set-up & operation sheets
By Bill in forum Community Club HouseReplies: 9Last Post: 08-08-2003, 04:15 PM
Posting Permissions
