586,108 active members*
3,293 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Tormach Personal CNC Mill > Tormach PathPilot™ > NonTormach Lathe HAL problem, door and limit inputs

Thread: NonTormach Lathe HAL problem, door and limit inputs

Results 1 to 2 of 2
  1. 07-18-2023, 03:49 PM #1
    randykj
    randykj is offline Registered
    Join Date
    Feb 2012
    Posts
    42

    Smile NonTormach Lathe HAL problem, door and limit inputs

    How are you configuring door and limit switches in your HAL files? I'm stuck.

    On PathPilot lathes use multiple frequencies on one input pin (freq2pin) to monitor multiple functions. That includes the door safety switch, and homing/limit switches.

    What are we doing to get around this problem?
    Reply With Quote Reply With Quote
  2. 07-18-2023, 04:08 PM #2
    randykj
    randykj is offline Registered
    Join Date
    Feb 2012
    Posts
    42

    Re: NonTormach Lathe HAL problem, door and limit inputs

    'm trying to follow this guidence, remap limits and door switch to the pins that are designated for Probe and Toolchange Input.

    I'm studying the LinuxCNC HAL guide. I'm just not fully sure how to do this correctly. ?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Probe and Limit inputs ignoring Deceleration settings??
    By awpross in forum PlanetCNC
    Replies: 24
    Last Post: 02-22-2022, 06:40 PM
  2. I fried limit switches inputs
    By JukeBox in forum PlanetCNC
    Replies: 15
    Last Post: 12-06-2021, 04:55 PM
  3. limit switch inputs on Mana ver 2.1 controller
    By cpe256 in forum DeskCNC Controller Board
    Replies: 0
    Last Post: 12-28-2016, 06:02 AM
  4. Y and Z limit switches inputs not working
    By Lasr Da Vinci in forum Hobbycnc (Products)
    Replies: 1
    Last Post: 06-18-2015, 11:33 PM
  5. How many inputs are needed for limit switches?
    By RPCElectronics in forum Benchtop Machines
    Replies: 4
    Last Post: 05-31-2012, 10:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules