[degressor]

Hi, as i mention in the post below, we bought used SCM Record 1. This is our first CNC center and we have no experience.
The problem is: we don't have documentation, the prorgramms, but only electical sheme.

Maybe some one know where i can found it or send it per email?

Google search does't bring much.

[asterix13]

Hi have just joined the forum.
We have got a second hand record 1 and have a parts manual and all the NUM 720 manuals if you still need them.
regards Asterix13

[hemengtingting]

Hi have just joined the forum.
We have got a second hand record 1 and have a parts manual and all the NUM 720 manuals if you still need them.
regards Asterix13

Hi p_ken,


we recently bought a used CNC machine and are missing the manual.
Would you mind to send me a manual ?
My email adress is [email protected]

THANK YOU VERY MUCH！

[P_Ken]

Hi i have been running a record on for the past 10 years. I have parts. num 720 manuals postprosesor for alphcam and a lot of experience.

regards p_ken

[asterix13]

Hi p_ken,
Nice to hear from another record owner, can you help with this problem I have.
I have been running the scm record 1 for around 6 months but have been unable to get the drip feed working. Following the instructions from the NUM 720 manual does not work.
So I can only run very small programs + - 1200 lines of code

[fictionist]

Hi i have been running a record on for the past 10 years. I have parts. num 720 manuals postprosesor for alphcam and a lot of experience.

regards p_ken

Hi p_ken,
we recently bought a used scm record 1 (1997) as a second machine for 3-axis jobs and are also missing the manual. Would you mind to send me a manual as well?

Thanks a lot in advance

[asterix13]

Hi p_ken,
we recently bought a used scm record 1 (1997) as a second machine for 3-axis jobs and are also missing the manual. Would you mind to send me a manual as well?

Thanks a lot in advance

Hi fictionist,
Let me have your e-mail details and I will send Num 720 manuals to you.
File size for 720 is about 14meg.
I also have Num 820 if needed.

Do you use drip feed on your machine?

Regards [email protected]

[fictionist]

Hi fictionist,
Let me have your e-mail details and I will send Num 720 manuals to you.
File size for 720 is about 14meg.
I also have Num 820 if needed.

Do you use drip feed on your machine?

Regards [email protected]

Thanks a lot for the quick response. My email address is [email protected]

Regards form the sunny Cape Town

[hemengtingting]

Hi p_ken,
i am a member of CNCzone.

we recently bought a used CNC machine and are missing the manual.
Would you mind to send me a manual ?
my email adress is [email protected]
Thank you very much!

[avouzikis]

Hello everybody,

I also need a copy of num720 manuals in english.
My e-mail is [email protected]

Greetings from Greece
Thanks a lot

[shaunbirm]

Hi All,

Does any of you lot use Xilog or Xilog plus.
If you need any help just give me a shout regarding Xilog or Xilog plus.

Also I have an alphacam post processor for the NUM 720, NUM 750, also for the RECORD 220 I have two post procesors.

You might need to tweek them.

Shaun

[branchy]

Hi All,

Does any of you lot use Xilog or Xilog plus.
If you need any help just give me a shout regarding Xilog or Xilog plus.

Also I have an alphacam post processor for the NUM 720, NUM 750, also for the RECORD 220 I have two post procesors.

You might need to tweek them.

Shaun

Hi Shaun,
Do you drip feed to your SCM? I have a Record 2 and am using Ezcam Software. I can send files no problem at all but drip feed has been ongoing issue for the past 12 months. if you have any advice I would be most appreciative.
Cheers
Chris

[alanhende]

Hi Shaun,
I am working on a Record 220 & would certainly like an Alphacam post if you still have one.

Thanks

Alan

[MLEDWARDS]

Hi Shaun/All

I appreciate this tread is rather old but I've just bought a SCM Record 1 and require an Alphacam post processor for the NUM 720, is that something you can still help with!?

Thanks

M

[hpowell]

Hello,
My company produces a text editor with DNC for CNC controls. I have been asked for help in connecting an SCM Record1 with NUM 720 controller to a PC.
I cannot find any communication parameters, and there is no manual available.
Can anyone help?

[branchy]

Hi Harry,
Sorry for replying to you through this post but it was the only way I could send an attachment.
Thanks for your interest.
Look forward to hearing from you.
Kind Regards
Chris.

P.S. The file is a job sent from the machine to the PC.
Cheers

[Syakoup]

Hello everybody,

I also need a copy of num720 manuals in english.
My e-mail is [email protected]

Greetings from Greece
Thanks a lot

Hello evey bady
We recently bought a used scm record 220 (1999) as a second machine for 5-axis jobs and are also missing the manual. Would you mind to send me a manual as well and electica wiring to install
My e-mail is [email protected]
Thanks a lot in advance

[asterix13]

Hi p_ken,
Nice to hear from another record owner, I have been running our scm Record 1 for the last 6 months using AlphaCam but can not get the drip feed to work. The NUM 720 instructions do nothing so I can only run small file sizes + - 1200 lines of code. This means I have to run jobs broken in small lots. Can you help?
Regards Asterix13

[P_Ken]

Hi Asterix13

I have drip fed programs some time ago but cant totaly remember how.. we increased the memory. I will hunt through my notes and try and recall the process.

[Lunder]

If anyone has the programming manual for NUM720f i would be very grateful.
Email: [email protected]

Best regards

PS: What kind of a PC and software would be compatible with the Num720f for program storage and easier input? The machine is from Greda