Can anyone here help make some parts. Here is a sample picture. The finished part will look like this maybe not 100 percent. To give you an idea it's about an inch long and 1 inch wide! It will need to be made from 6061 or 2024 type stock. If you can help and are interested please email me at [email protected]
Take care,
Tim
Thread: Need parts made!
Results 1 to 4 of 4
-
06-09-2004, 02:44 AM #1
Registered
- Join Date
- May 2004
- Posts
- 56
Need parts made!
-
06-09-2004, 03:36 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 6855
Do you have a cad or cam file?
-
08-05-2005, 05:56 AM #3
Registered
- Join Date
- Jun 2005
- Posts
- 24
We would certainly be interested in looking at your part. We are equipped to do this sort of thing. Drop us a note... or give us a call 806-626-0938 .... As to speak with Dan.
Jack.
Rams Support
-
08-05-2005, 06:41 AM #4
Registered
- Join Date
- Dec 2003
- Posts
- 768
Ygm
Proud owner of a Series II Bridgeport.
Reply With QuoteSimilar Threads
-
Need parts made....
By brewerpaul in forum Employment OpportunityReplies: 4Last Post: 08-07-2005, 04:15 AM -
Need some parts made and maybe more later.
By dmgdesigns in forum Employment OpportunityReplies: 3Last Post: 10-24-2004, 07:00 PM -
RFQ - need some parts made
By lee_1999 in forum Employment OpportunityReplies: 9Last Post: 08-24-2004, 04:30 AM -
Need some parts made - Aluminum and plastic
By SRT Mike in forum Employment OpportunityReplies: 1Last Post: 05-03-2004, 08:26 AM -
Need Some R/C parts made
By debutis in forum Employment OpportunityReplies: 6Last Post: 04-07-2004, 04:19 PM
Posting Permissions
