[Amba]

hello, does anyone have a drawing for a ball screw with a nut for a 15xt fadal?

Best regards

[machinehop5]

...how about a Fadal manual drawing?
https://nxgenparts.com/content/Parts...MC_15-15XT.pdf

[Amba]

thanks mate i saw it. I live in Poland, it's hard to find parts for the fadal here. but there is a company that makes ball screws together with nuts only need dimensions

[machinehop5]

...is there a NSK or any Part number on the old ball screw?
https://www.nskamericas-literature.c...e/download.pdf

[Mhook]

thanks mate i saw it. I live in Poland, it's hard to find parts for the fadal here. but there is a company that makes ball screws together with nuts only need dimensions

As far as I remember, the vmc15 xt ballscrew had a diameter of 32 mm and inch pitch equal to 5.5 mm.

[Amba]

yes you were pretty close. it is 1-1/4 inch and 0.2 inch pitch. i.e. 31.75mm diameter and 5.08mm stroke. however, I need to know the total length of the screw and what threads there are. what are the dimensions of the nut. then I could have it done without disassembling the machine