[abolfazltavalaei]

Hello
I have a CNC with Siemens 840c controller
Its turret has 12 tools
when i send T1 code Tool number two is placed on the turret according to the The number written on the turret
When I call tool two, tool three is placed in the turret
And just like that, until the end, the tool placed in the turret is one more than the called number
Where can I make the settings?
Please guide me carefully, I am a beginner

thanks
Abolfazl

[Algirdas]

Just a minute.
Let's make it simple. Just pretend we have three tools:
Center
Drill
Tap
You set the Center under the name "555" for instance. Drill "601" and Tap "790" in the magazine
You call the tool "555" and here machine puts the Center in the turret.
You call the tool "601" and here machine puts the Drill in the turret..
You call the tool "790" and here machine puts the Tap in the turret..
Isn't it?
Just for curiosity what it the "CNC" you have? is it lathe with magazine or combined machinetool?

[Superman]

Just a minute.
Let's make it simple. Just pretend we have three tools:
Center
Drill
Tap
You set the Center under the name "555" for instance. Drill "601" and Tap "790" in the magazine
You call the tool "555" and here machine puts the Center in the turret.
You call the tool "601" and here machine puts the Drill in the turret..
You call the tool "790" and here machine puts the Tap in the turret..
Isn't it?
Just for curiosity what it the "CNC" you have? is it lathe with magazine or combined machinetool?

Make it even simpler.... it a lathe with a 12 station turret, T1 to T12
Oops, that's what the OP said.