Originally Posted by
machinehop5
...after thinking more about your great topic of how to deal with mid start points. I did some testing. 1st memory storage is to small to store complete program....So, I stored just the first part of program with all startup information for Tool,etc and added/edited a Line with M00 ...then ran the stored program....then switched to RS232C from Catalog....then Mode select Single Block before starting transfer from PC, which was setup to transfer from the Line number of choice to restart cutting operation...of coarse need to add/edit a M3 M8 to the Program file at the beginning. Things seem to work ok Dripfeeding after that testing.... There may be better ways to handle broken tool restart....
DJ
Tested on a Delta50M