[outlier]

Hi all,

Just got a new machine and I was hoping to sort out the post without doing grave injury to myself and new machine. Attached is a working .nc file, any input or help on this is greatly appreciated!

Best,
Outlier

[outlier]

Having some issues with duplicate posts and "invalid file", apologies to all....

Here is a snippet from the code showing tool change, start, and end. Thank you.

%
(T2 D=0.125 CR=0. - ZMIN=0. - FLAT END MILL)
(T3 D=0.1875 CR=0.0937 - ZMIN=-0.0187 - BALL END MILL)
(T5 D=0.5 CR=0. - ZMIN=0. - FLAT END MILL)
G90 G94 G17
G20
G28 G91 Z0.
G90
(ADAPTIVE7)
N10 M06 T5
S17000 M03
G54
M08
G00 X3.5347 Y1.3034
G43 Z1.0443 H05
Z0.6443
Z0.3943
G01 Z0.3443 F60.
X3.5348 Z0.3425
Y1.3033 Z0.3408
X3.535 Z0.339
X3.5352 Y1.3032 Z0.3373
X3.5354 Y1.3031 Z0.3356
X3.5358 Y1.303 Z0.3339
.
.
.

Y1.23 F120.
Y1.28 F60.
G03 Y1.33 Z0.05 K0.05
G00 Z0.6443
X-0.31 Y1.23
G01 Z0.4836 F40.
Z0.05
G18 G02 X-0.26 Z0. I0.05
G01 X-0.21 F60.
X6.04 F120.
X6.29
X6.34 F60.
G02 X6.39 Z0.05 K0.05
G00 Z1.0443
G17
M09
G28 G91 Z0.
G90
(MORPHED SPIRAL1)
N11 M06 T3
S16000 M03
G54
G00 X0.4912 Y0.51
G43 Z1.0443 H03
Z0.205
G01 Z0.1437 F94.
Z0.1427
X0.4913 Z0.1416
X0.4915 Z0.1406
X0.4917 Z0.1396
X0.4919 Z0.1386
X0.4923 Z0.1376
X0.4926 Z0.1366
X0.4931 Z0.1356
X0.4935 Z0.1347
X0.4941 Z0.1338
X0.4947 Z0.1329
X0.4953 Z0.1321
X0.496 Z0.1313
X0.4967 Z0.1305
X0.4975 Z0.1298
X0.4983 Z0.1291
.
.
.
X4.0725 Y0.354 Z0.1276 I-0.0275 J-0.001
X4.1275 Y0.356 Z0.1044 I0.0275 J0.001
X4.0725 Y0.354 Z0.0813 I-0.0275 J-0.001
X4.1275 Y0.356 Z0.0581 I0.0275 J0.001
X4.0725 Y0.354 Z0.035 I-0.0275 J-0.001
X4.1275 Y0.356 Z0.0118 I0.0275 J0.001
X4.1 Y0.3275 Z0. I-0.0275 J-0.001
Y0.3825 J0.0275
Y0.3275 J-0.0275
G00 Z1.0443
G28 G91 Z0.
G90
G28 G91 X0. Y0.
G90
M30
%

[outlier]

Hi all,
I got this sorted out with a few hours and extreme caution. Please DM me if you want a copy of the file. It is pretty straightforward. I'm sure there is at least one other person who bought a ShopSabre IS-M machine and uses MadCAM.... maybe.... Cheers! -O

[outlier]

Hi all, Does anyone know how to add N numbers for each operation in the MadCAM post? Thanks, -O