Anyone in here have a FluidNC Post Processor for CamBam?
Anyone in here have a FluidNC Post Processor for CamBam?
So you only need the GRBL postprocessor installed with CamBam.The intent is to maintain as much Grbl compatibility as possible. It is 100% compatible with the day to day operations of running GCode with a sender, so there is no change to the Grbl GCode send/response protocol, and all Grbl GCodes are supported.
If your sender does not support tool change (M6) there is still this without toolchange
https://cambamcnc.com/forum/index.php?topic=9069.0