I've tried rutex drives and they can't handle the heat. Even with a ton of braking resistanceadded. So I want to try to use the old gettys scr drives and use the rutex step and dir to analog cards. Or maybe some other motion control card. First I need to know how to wire the old drives. The wiring diagrams from the machine seem to leave a lot unsaid. Can any one tell me how to hook up these drives?
Results 1 to 2 of 2
-
11-06-2007, 08:10 PM #1
Registered
- Join Date
- Nov 2007
- Posts
- 1
pc control for gettys scr11-1010-52 or n150 drives
-
08-21-2015, 05:07 PM #2
Registered
- Join Date
- Feb 2011
- Posts
- 0
Re: pc control for gettys scr11-1010-52 or n150 drives
Does your drive have terminal strips at the bottom front?
Can you provide picture?
Reply With QuoteSimilar Threads
-
Gettys 360 amp questions
By dave3431 in forum Servo Motors / DrivesReplies: 3Last Post: 03-19-2008, 02:56 PM -
Is Mach 3 able to control 3 independent gecko drives?
By mrmz in forum Mach Software (ArtSoft software)Replies: 1Last Post: 07-27-2007, 11:13 PM -
gettys motor
By don_harby in forum Servo Motors / DrivesReplies: 2Last Post: 02-16-2007, 01:08 AM -
Gettys FANUC Motors
By spottiepop in forum FanucReplies: 11Last Post: 07-09-2006, 02:49 PM -
Control Technology Corp. Servo drives
By tpworks in forum CNC Machine Related ElectronicsReplies: 1Last Post: 04-18-2004, 02:59 AM
Posting Permissions
