[secretman]

i encounter this badboy a wile ago i made the testing team i use it a lot, its the perfect solution for many of us , easy to setup , work really nice, don't take space, work with most machine that can reverse spindle, mach3, uccnc, fluidnc etc.. and its cheap give it a look you will not be disappointed. and the service is fast and they help a lot if you have any question, problem etc..

Rapidchange atc
https://www.youtube.com/watch?v=B0GUKdBJ3EU

here is the link: https://rapidchangeatc.com/

i got a discount code for you guy's that are interested
JPLD80 gives 80$ off the full magazine

look at there video on youtube and they have a discord https://discord.gg/EETPWWMW

[asuratman]

how many input and output needed ? Can we use mach3 bob with db25 (i.e. STV2 bob) ?
I mean the bob have enough io.

[Dgreilick]

how many input and output needed ? Can we use mach3 bob with db25 (i.e. STV2 bob) ?
I mean the bob have enough io.

I am not familiar with that particular bob. The tool setter uses the probe input, the IR sensors use one input and the dust cover can be operated with an extra axis or with an output and a third party logic board like an Arduino. However we are close to having that solution available.