586,094 active members*
4,229 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Touch screen OSP-P300S calibration

Thread: Touch screen OSP-P300S calibration

Results 1 to 1 of 1
  1. 10-10-2023, 09:51 AM #1
    rovivo
    rovivo is offline Member
    Join Date
    Oct 2023
    Posts
    2

    Question Touch screen OSP-P300S calibration

    Hi
    We have a OKUMA MULTUS B300 II with the touch screen PC OSP-P300S.
    Now we changed the touch field. After calibrating, everything works fine, but after a reboot the calibration data is gone, and we have to calibrate it again.
    Is there any write filter on the system I have to deactivate first?
    Reply With Quote Reply With Quote
  2. 10-11-2023, 05:57 AM #2
    deadlykitten
    deadlykitten is offline Member
    Send a message via ICQ to deadlykitten
    Join Date
    Jun 2015
    Posts
    4154

    Re: Touch screen OSP-P300S calibration

    hy rovivo i am not sure if it would work, but try to compare files / registry before and after calibration, maybe you spot the change

    program files \ fcl \ rtp \ usbtab \ caltuwin.exe

    it will require some hunting / kindly
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules