I am building a new controller for a Multicam Router. I am using a Masso G3 Touch for the controller and Clearpath SDSK motors. My question is this,
Masso tells me to bond the V- terminal for the G3 Touch controller power supply with the V- on any other 24VDC power supplies within the system (I have 2 other 24 VDC power supplies). In addition, I also have 2 Amazon IPC-5 75VDC power supplies for the servos. Do I need to bond ALL of the V- outputs together or just all the 24 VDC V- outputs?
Attachment 497866