Hello
I am new on here. Nice to meet you.
I've come this far to answer your questions..
I am using an outdated version of imspost7.2i,
machine files are being created.
The software used is CATIA,
The 5-axis(X.Y.Z.B,C) controller is a Fanuc 31i-B5.
It outputs G68.2(3+2axis) by default and G43.4 (RTCP) if needed.
SAMPLE file that outputs 68.2 by default and uses G43.4 (RTCP) when needed.
I need your help.