Hello all, I bought a used Nakamura Tome Lathe from an auction a while back. We are using Mastercam to program and post with. When we post though the entire program is mirror reversed. We've tried everything but cannot find a solution. Can anyone help us? Thanks in advance.
Thread: Nakamura Tome
Results 1 to 1 of 1
-
11-03-2023, 07:20 PM #1
Member
- Join Date
- Nov 2014
- Posts
- 1
Nakamura Tome
-
12-02-2023, 11:57 AM #2
Registered
- Join Date
- Nov 2007
- Posts
- 352
Re: Nakamura Tome
When it creates the program for the machine its mirrored ? or the machine is ?
-
12-02-2023, 12:53 PM #3
Flies Fast
- Join Date
- Dec 2008
- Posts
- 3109
Re: Nakamura Tome
Who set the post & configured the machine in Mastercam ?
Are you programming in the front quadrant, and using a rear turret ?
Your geometry should be in the machine's X+ side of the axis, with Z- going towards the chuck.
And your tools defined appropriately for the operation.
Reply With Quote
Posting Permissions
