Greetings, Im looking for a little bit of advise with aligning the mirrors of my laser.
I have spent a few days and many hours learning the alignment, and i have had some good success so far, The only adjustment i cannot get any results from is the Y axis mirror 3 furthest from the laser.
I can get mirror 2 to align just fine, but on the opposite side of mirror 3, there is always a small vertical gap.
I thought adjusting the laser tube could possibly change the results, but no matter what adjustments i make with it, the vertical distance doesn't change.
Has anyone had this problem before? i cannot seem to find any information online about it.
3 out of the 4 corners for mirror 3 are hitting the same spot, and i can get them to the center of the laser head fine. That last corner is giving me grief.
Would love a helping hand if possible. Thank-you