I want to create G-code that will load a value into the "Probe Type" column. on my Haas DM-2 Mill with classic controller.

The machine is looking for either a 0, 1, 2, 3

Just for reference, this is what these 4 values are controlling.
0 = No probe
1 = Length Probing ( Rotating )
2 = Length Probing ( Non-Roating )
3 = Length and Diameter probing ( Rotating )

I want to create G-code that will load a "0" into this column for a specific tool ( example tool 1 )

But I don't know what the correct data field would be to achieve this.

I am attaching a picture of the column I am talking about.

Attachment 499136