[kentdesautel13]

I want to import data into the "Probe Type" field which is in the tool offset screen on the haas controller, but I don't know what data field name to use in my G-code.

It's going to be looking for a numeric value ( 0,1,2 or 3 )

Is there a master list of data fields for the haas machines?

I'm attaching a picture of the Probe Type column I'm referring to.

[Berrigan]

Hope this helps

[kentdesautel13]

Thank You very much.... this will get me going in the right direction....

Thanks again,

Kent

[jrfiggz1]

One way to do this is to export your offsets to an OFS file. On newer controls, I know you can press F4 on your list programs interface to bring up system options... this includes the ability to save your offsets. I'm not sure what this looks like on older controls, but on NGC it looks like an XML file which includes all parameters for tool offsets, including Tool Name, which cannot be accessed by a macro variable.