586,106 active members*
3,115 visitors online*
Register for free
Login

Thread: Locating a pin to install auto z probe

Results 1 to 1 of 1
  1. 12-12-2023, 10:15 PM #1
    Mangohater
    Mangohater is offline
    Join Date
    Sep 2022
    Posts
    1

    Locating a pin to install auto z probe

    I purchased an inexpensive z probe plate on amazon. I need to know where to hook up the wires into my control board. One comes from the plate, the other from the alligator clip(ground)
    My machine is an Industrial CNC Artisan408. When I pulled the board out, I was expecting to find a row of 15 pins, and just count to get location using Estop wire as reference. It is in the slot labeled E. I assume the ones next to it are the limiting switches H=high, L=low.
    Using Mach3 Software.
    Thank you.
    Chuck.
    Attached Thumbnails Attached Thumbnails 1000005456.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. MAZAK ST35 tool locating Pin Replacement
    By Lance2793q in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 09-04-2018, 04:02 AM
  2. Collet locating pin failure: spindle disassembly
    By GLCarlson in forum Tormach Personal CNC Mill
    Replies: 8
    Last Post: 12-08-2016, 05:08 PM
  3. Trying to find out what this locating pin/clamp is
    By bweidlein in forum Work Fixtures / Hold-Down Solutions
    Replies: 3
    Last Post: 09-25-2013, 09:55 PM
  4. Locating MFin pin - Fanuc OM
    By charger19690 in forum Fanuc
    Replies: 6
    Last Post: 11-07-2011, 02:00 AM
  5. r-8 locating pin broke
    By jarr88 in forum Benchtop Machines
    Replies: 3
    Last Post: 08-27-2007, 01:32 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules