I just changed the screw for a new one. It has a 42/62 transmission, 12mm pitch, but when I move it 0.05mm on the control, it physically gives me 0.075. How can I adjust this advance?
Results 1 to 2 of 2
-
12-12-2023, 10:27 PM #1
- Join Date
- Dec 2023
- Posts
- 2
physical advance of my ball screw is not equivalent to that of the control
-
12-13-2023, 10:09 PM #2
Member
- Join Date
- Apr 2004
- Posts
- 5737
Re: physical advance of my ball screw is not equivalent to that of the control
Have you tried adjusting the steps per unit by -50%?
Reply With QuoteSimilar Threads
-
Double ball nut worth it for long C7 grade rolled ball screw?
By salukikev in forum Benchtop MachinesReplies: 30Last Post: 09-02-2021, 07:48 PM -
Play in ball screw with anti backlash ball nuts
By chesty012003 in forum Linear and Rotary MotionReplies: 0Last Post: 08-20-2021, 07:27 AM -
Ball nut arbor size for 1605 ball screw
By kdoney in forum MetalWork DiscussionReplies: 1Last Post: 04-08-2020, 07:45 AM -
Adding ball screw to lathe for Electronic Lead Screw
By harrzack in forum Hobbycnc (Products)Replies: 0Last Post: 12-28-2018, 03:28 PM -
Big Ball Screw & Ball Nut mistake.
By Jack F in forum Uncategorised MetalWorking MachinesReplies: 12Last Post: 04-29-2006, 04:53 AM
Tags for this Thread
Posting Permissions
