Can you apply more voltage (78 VDC verses 60 VDC) to a DQ860MA controller than the stepper motor requires by just setting the amperage of the motor with the DIP switches on the controller?
Results 1 to 5 of 5
Threaded View
-
11-18-2023, 09:45 PM #1
- Join Date
- Nov 2023
- Posts
- 3
Over voltage to DQ860MA controller question
Reply With QuoteSimilar Threads
-
NVUM CNC Controller setting it up with the DQ860MA Micro stepper Driver
By adamfromUK in forum CNC Machine Related ElectronicsReplies: 1Last Post: 08-03-2018, 06:37 PM -
Help with DQ860MA Driver
By HammerM0N in forum ArduinoReplies: 1Last Post: 12-27-2017, 11:58 PM -
Heidenheim TNC 145 question about driving voltage (retrofit and driving voltage)
By gizmo333 in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 01-10-2016, 01:45 PM -
Precix 9100 Controller - VI voltage issue Voltage range only 6.5 to 10Volts
By wdysf150 in forum Controller & Computer SolutionsReplies: 0Last Post: 08-15-2013, 08:24 PM -
WANTAI DRIVE DQ860MA
By gordonsceptre in forum Servo Motors / DrivesReplies: 2Last Post: 05-14-2013, 02:02 AM
Tags for this Thread
Posting Permissions
