I am using an HVAC blower from an old furnace run through an 'oneida dust deputy 2.5' collector.
It simply plugs into a 120v outlet and I dont want to turn it on and off manually every time.
My CNC controller has available outputs, so I'm looking for a relay that I can configure with Mach3 to turn on/off with the spindle.
I'm hoping to simply run a wire from the CNC to the relay and every time the spindle starts/stops, so does the dust collector.
Looking for something simple like a 120v outlet plug adapter with an input wire that can be triggered by mach3.
Any product recommendations?