[catur4widhi]

My machine rested for more than 1 year and when I started it it had lost all SRAM data because the backup battery ran out.


does anyone in this group have a backup of SRAM mori seiki nv4000 DCG parameters? will you share with me, or i can pay for it. Thank you in advance.


My message to Fanuc users: You have to back up at least once every 6 months, don't be like me, only realizing after everything is gone

My email : [email protected]

[machinehop5]

...does this Fanuc Controller have a HDD?

What is the Controller Model number?

[catur4widhi]

...does this Fanuc Controller have a HDD?

What is the Controller Model number?

i have found it on front end display pc. in DNC folder..btw thanks.

[catur4widhi]

...does this Fanuc Controller have a HDD?

What is the Controller Model number?

the number is A02B-0283-B803

no HDD but CF card, i was found it by searching every folder on host front end pc.

btw thanks

[machinehop5]

...there might be a Backup file on the CF drive.

DJ

[catur4widhi]

All sram reset process has done from IPL mode by switching rotary key. but we are facing another problem the control wont finish boot, 7 segment start light up from 8, F, and then stuck at 9.
Does anyone know which part is the problem?