Special purpose type thing, 2.75" dia change in 6" of run. Is that an I value of 1.604" starting 1/2" before the part? Can the control even handle that big of an I value?
G71X2.75z-6.I1.604D.05H.375F.15M33M73
Special purpose type thing, 2.75" dia change in 6" of run. Is that an I value of 1.604" starting 1/2" before the part? Can the control even handle that big of an I value?
G71X2.75z-6.I1.604D.05H.375F.15M33M73
Got it figured out.
hy as long as angle < 45*, and linear axis speed is slow in comparison to rapid, then no worriesCan the control even handle ...
if you wish for specific advice, please share more / kindly
kfigured out
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg