Dear friends i have recently bought an AC 220 Servo driver :A1-SVD15 model and a servo motor 90ST-M0243Z1 I have made all the connections to my motion card MK6-V-II V552 . For now all is good but the problem is when i move the motor . It goes the chossen direction but also in this moment it goes back and forward start some kind of oscilating move to whom i haven't undestand what parameter to modify .
The Ideea is that the motor shaft is not rigid i can rotate it left or right even if i send a comand to the motor. Can anybody help me with my problem.
I can send also a video via whatsup or telegram .
Regards.
Costin.
Results 1 to 3 of 3
-
01-15-2024, 01:07 PM #1
Member
- Join Date
- Jul 2012
- Posts
- 28
Question about moving 1 servo motor
-
01-15-2024, 03:07 PM #2
Community Moderator
- Join Date
- Apr 2018
- Posts
- 134
Re: Question about moving 1 servo motor
Due to server problems, the images in the post above are not viewable at the Zone. So I am reposting them:
https://youtu.be/RGAePnsHawc
Three photo links:
https://i.postimg.cc/tqZjCL47/20240115-132942.jpg
https://i.postimg.cc/knDrfk8w/20240115-132849.jpg
https://i.postimg.cc/HY7qCX6y/20240115-132839.jpg
-
01-15-2024, 09:28 PM #3
Member
- Join Date
- Oct 2004
- Posts
- 314
Re: Question about moving 1 servo motor
We have a connector board for those servos:
https://cnc4pc.com/c34svdb100-invt-sv-db100.html
Use Mach4 or UCCNC.
Arturo Duncan
https://cnc4pc.com
Reply With Quote
Posting Permissions
