To put it bluntly. I am another new guy with a DIY cnc build. Thought I would buy the chinese spindle/vfd and ruin it before I spent money on a big boy spindle.
I bought this kit:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
It worked just fine for 6 months or so. Then the motor quit turning on. I had lost my manual by this time(I know..). So I ordered a new motor(thinking this was the issue).
New motor(No I don't have the original anymore):
110V 2.2KW 2200W 24000RPM 400HZ
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I had some trouble at first getting the PD settings to work. Eventually it spun up, and we got to work for a few weeks. Then, again the motor just quit turning on.
So, now I am asking for your help.
Can someone give me the settings I need for this setup, please? Included are some photos of my wiring. If there is anything else you need let me know.
Thank you very much, in advance. For your time and consideration of guidance.