[TFGC]

Hello! I have a European friend with a Milacron 1210 lathe w/850sx control and he needs programming help using the C axis coordinated with live tooling. He believes it requires a G79, but is unsure of how to use it. I tried to contact Mike Trunk per directions found on other posts, but I was told he has not been with Fives since 2020; can anyone possibly assist me?

I appreciate any guidance provided!

[gwood]

See PDF attached

Also Face Contour Diamond PGM (Text)

:010000G00G63G98G70X4.5-[M15]-[M40]Z10-[M16]-[M41]
N010(MSG,MILL DIAMOND, T07 .5"DIA. ENDMILL)
N020G92S4000.
N030M26T7
N040G0Z1.2-.7400
/N050M08
N060M19
N070M23S3.82*300/.5M3
N080G79D92R0
N090G79D10X0R1
N100G79D11X0.5774R0.0000L.05F05
N110G79D11X0.0000R-1.000L.05F05
N120G79D11X-.5000R0.0000L.05F05
N130G79D11X0.0000R1.0000L.05F05
N140G0X4.5-[M15]-[M40]
N160M22
N150M20
N170M50
N180M2

GWood