Hello All,
I have a ShopSare 23 and am wanting to set it up with vacuum fixturing. My table will be 30"x41" HDPE then ultra lite fiber board on top for the spoil board. I have single phase 220 on a 30 amp breaker and need advice on pump specs. I am considering this regenerative pump. FUJI ELECTRIC VFC508P-2T Regenerative Blower 2.5 HP 79.7 in wc Max Op Pressure

https://www.grainger.com/category/pn...Not+Applicable

Any advice is appreciated and welcomed.

Tim Sewald