Hello all,
I have looked through the forum and have seen people posting specific servo faults that their 400s are throwing. I have a similar issue but I do not have the ability(or so I think) to generate a specific code from the fault.
After doing some research I believe I have the "version" of the 400 Alpha that does not have the fanuc control included. There doesn't seem to be a diagnostics screen to look at the fault codes.
The Fanuc main board is a a02B-0259-b501 series 21-tb.
All I see for warning lights inside the panel is a red LED on '2' on the Alarm indicators. All I can see on the operator screen is 'ALARM SERVO'
Any assistance on this?
Thanks!
Results 1 to 4 of 4
-
01-30-2024, 03:41 AM #1
- Join Date
- Jan 2024
- Posts
- 1
Harrison Alpha 400 servo fault, no code?
-
02-04-2024, 12:43 PM #2
Member
- Join Date
- May 2016
- Posts
- 526
Re: Harrison Alpha 400 servo fault, no code?
Hi send me your email and I'll send you a diag sheet
-
02-13-2024, 01:16 AM #3
- Join Date
- Jan 2024
- Posts
- 1
Re: Harrison Alpha 400 servo fault, no code?
My PMs dont seem to be working, can you send me one please?
-
02-13-2024, 08:10 PM #4
Member
- Join Date
- May 2016
- Posts
- 526
Re: Harrison Alpha 400 servo fault, no code?
No they are working fine I have just sent you a sheet
Reply With QuoteSimilar Threads
-
Harrison Alpha 400 Spindle Fault Detected - Error Code 2
By hhwolff in forum FanucReplies: 2Last Post: 11-23-2023, 06:49 PM -
96 Harrison Alpha 400 Spindle Fault detected!!!
By BrentJones in forum FanucReplies: 14Last Post: 05-05-2023, 10:24 PM -
servo alarm harrison alpha 400
By peco2002 in forum Harrison AlphaReplies: 2Last Post: 05-01-2023, 06:58 PM -
Servo alarm 414 Harrison ge fanuc Alpha 400 lathe
By davide.castro in forum FanucReplies: 5Last Post: 08-25-2013, 07:01 PM -
harrison alpha 400
By tommy san in forum Australia, New Zealand Club HouseReplies: 1Last Post: 11-15-2010, 08:01 PM
Tags for this Thread
Posting Permissions
