Hi everyoone,

I am new to the CNC world. I am building a screw driver application that is required for a part of wheel assembly we are doing. I am not sure where I can find this help.

I have a steeping motor mounted with a handle and a custom made chuck. This chuck need to turn a certain amount at a desired speed stop and then repeat. This will be controlled by pedal activation. The program I loaded is Drufelcnc. The communication works but it requires G Code to fuction. I have done some reading on Gcode but not sure how to mange this in the software or write it for this purpose

The process ( Chuck interface must start and stop at an exact location ) and reapeat with the pedal activation.

Stepping motor: Nema 17 1.2A 17CA02A-120
Driver: DM556
Motion controler: Breakoutboard Mach 3
Pedal: Foot pedal
Software: Drufelcnc

Thanks for any assistance and guidance as to where this information can be found