586,089 active members*
3,913 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Autodesk CAM > Autodesk Post Processors > Fusion 360 Postprocessor for DN Solutions LYNX 2100 LSYB

Thread: Fusion 360 Postprocessor for DN Solutions LYNX 2100 LSYB

Results 1 to 3 of 3
  1. 02-21-2024, 09:57 AM #1
    Raybond
    Raybond is offline
    Join Date
    Feb 2024
    Posts
    0

    Fusion 360 Postprocessor for DN Solutions LYNX 2100 LSYB

    Hi folks. Anyone with experience with Fusion 360 + LYNX 2100 LSYB? I have a problem with numbering the spindles (P11 iso P13 for sub-spindle, etc.) as well as other minor issues with the generic PUMA/LYNX post downloaded from Autodesk post library.
    Reply With Quote Reply With Quote
  2. 02-21-2024, 06:22 PM #2
    thePostmaster
    thePostmaster is offline Member
    Join Date
    May 2022
    Posts
    20

    Re: Fusion 360 Postprocessor for DN Solutions LYNX 2100 LSYB

    Hi there

    I specialise in creating and editing post processors for Fusion 360 and I'd be happy to help you customise your post processor to get the right output for your machine.
    Please message me at [email protected] or reply here if you would be interested in my services.

    Kindly

    Michael
    Reply With Quote Reply With Quote
  3. 02-22-2024, 03:47 AM #3
    joeavaerage
    joeavaerage is offline Member
    Join Date
    Nov 2013
    Posts
    4375

    Re: Fusion 360 Postprocessor for DN Solutions LYNX 2100 LSYB

    Hi the Postmaster,
    I have tried a PM to you on the forum, but CNCZone informs me you have turned messages off.
    I have also tried the email you posted, but it was undelivered.

    Is that your intention?

    Craig
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Looking For Siemens Acramatic 2100 Post Processor For Fusion 360
    By JordanMach in forum Autodesk Post Processors
    Replies: 10
    Last Post: 04-12-2024, 05:01 PM
  2. Postprocessor Fusion 360 / Alphacam
    By Maroslav4 in forum Videos
    Replies: 0
    Last Post: 02-23-2022, 12:56 AM
  3. Fusion 360 postprocessor for Syntec 6MB
    By MartinBarfoed in forum Chinese Machines
    Replies: 1
    Last Post: 12-16-2020, 02:27 AM
  4. Tool Setter Calibration - Lynx 2100 LSYB w/ Oi-TF Plus Control
    By MetalDawg in forum Daewoo/Doosan
    Replies: 2
    Last Post: 11-25-2020, 05:26 PM
  5. 4 Axis Postprocessor Fusion 360
    By PCSM-CNC in forum PlanetCNC
    Replies: 9
    Last Post: 01-08-2018, 08:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules