I have the Hardinge GX1000 OSP with Okuma controls.
I have a tool error. I started it up without air. I went to change a tool and I got an error. I have typed something incorrect before and got an ATC error. I noticed that the magazine was not indexed. I turned the motor by hand with machine off until I got LS3 and LS4 ON. When I go to the ATC page and try to advance through the confusion, I get the following code of 15714 "Magazine tool indexing is not Complete". It appears that I need to get the magazine to spin but I cannot. I tried a T1 command but the carousel/magazine will not spin. How do I reset the magazine and possibly get it to spin?