[daytona19876]

Hi ,
I'm looking for information on the motor of the lathe .
the motor is a 3 hp working on 230 ac volt . the info i'm looking for is the Rpm of the motor and it number of phase , Is it 1 or 3 phases . Also how many pole ?
Because I'm making a 4 axes for my pcnc 1100 and whant to know what was on the 15l , I want something with more torque that the rapidturn have , I think is a 1 hp motor .
You can reply to my personnal email at [email protected]
thanks
Alain

[shred]

Hi ,
I'm looking for information on the motor of the lathe .
the motor is a 3 hp working on 230 ac volt . the info i'm looking for is the Rpm of the motor and it number of phase , Is it 1 or 3 phases . Also how many pole ?
Because I'm making a 4 axes for my pcnc 1100 and whant to know what was on the 15l , I want something with more torque that the rapidturn have , I think is a 1 hp motor .
You can reply to my personnal email at [email protected]
thanks
Alain

The 15L motor is a long belt-drive to the spindle & encoder. 3-phase, driven off an internal VFD. It does not have a brake, so doesn't do indexing and would seem like a poor fit for an 1100 4th.

[daytona19876]

Thanks for the reply , but I only need the information !

[David C. Allen]

1690rpm 3 phase

[daytona19876]

Thanks you !

[shred]

Thanks for the reply , but I only need the information !

What use is the RPM of the motor if the belt drive isn't 1:1 (I'm pretty sure it isn't) and it's on a VFD for speed control anyway?