Hi Folks ,
I have a part that I want to duplicate that has 4 holes . I probe the hole that I want to be X o Y o and set it as such . I move it to the second hole and probe that hole and it does not show me the XY distance or position . I am not sure that I can do it with PathPilot . Can anyone give me any tips on how to do this ?
Ernie
Results 1 to 2 of 2
Threaded View
-
03-17-2024, 05:25 PM #1
Registered
- Join Date
- Aug 2005
- Posts
- 300
measuring the positions of a series of holes point to point
Reply With QuoteSimilar Threads
-
Lasercut 5.3 start point and end point not matched and curve line not smooth?
By shizyo in forum Laser Engraving / Cutting Machine General TopicsReplies: 8Last Post: 06-21-2019, 11:26 PM -
why the laser not line up (cutting original point does not meet end point)
By AmyThunderlaser in forum Laser Engraving / Cutting Machine General TopicsReplies: 2Last Post: 05-30-2014, 03:30 AM -
Fanuc 18i-TB absolute motor pulscoder zero point shifts itself (floating zero point)
By hp2703 in forum FanucReplies: 5Last Post: 09-25-2013, 05:20 PM -
measuring a diameter by x & y point values
By Doug Tyler in forum Calibration / MeasurementReplies: 1Last Post: 01-05-2008, 12:18 AM
Tags for this Thread
Posting Permissions
