Hey Im looking for someone near Coos Bay, Oregon that could meet me and help me edit some G code. Im using Fadal Format 1, G code produced in Mastercam X4 and Edited in Cimco V5. Only drilling and tapping holes in the end of parts too tall to stay under the normal tool change height. Need to raise first tool Z height by 2.5" to clear part moving in for 1st operation. Then need the part to move in X to the right 16" before tool change. After new tool loaded need tool to raise 2.5" higher to clear part, then move part back in X 16" to left. Repeat that cycle for one more tool change and then keep the tool above part while part returns to HO. Maybe this could be done on line?
I have been using Fadal for 9 years but never ran into this tall a project.
Thank you in advance for any info