Hi everyone
why M49 code doesn't inactive spindle pot? M49 works for the feedrate pot, but not the spindle in 88hs!
i tapping with G84 but spindle rotation must adjust manually!
thx
Thread: M49 code
Results 1 to 1 of 1
-
04-04-2024, 09:52 AM #1
Member
- Join Date
- Aug 2017
- Posts
- 104
M49 code
Reply With QuoteSimilar Threads
-
M49 freezes current version of TNG
By awpross in forum PlanetCNCReplies: 6Last Post: 06-29-2022, 05:11 PM -
Need help with g code for fire control pocket on AR15 lower reciver, have G code.
By DigitalPunk in forum RFQ (Request for Quote)Replies: 51Last Post: 09-16-2020, 01:28 AM -
Can I use G-code/M-code to control external device by Weihong controller?
By dungvv in forum Controller CardsReplies: 3Last Post: 02-27-2019, 09:53 PM -
mach3 crashing with run of code/drilling holes through table with other code
By normalform in forum Mach Software (ArtSoft software)Replies: 1Last Post: 07-28-2014, 03:38 AM -
corel.hpgl > sheetcam.tap > pronterface.g-code > slic3r.g.code> ramps 1.4 > H-BOT
By thesignworks in forum Uncategorised CAM DiscussionReplies: 0Last Post: 05-25-2014, 02:11 PM
Tags for this Thread
Posting Permissions
