I have a new used fagor cnc machine, recently - fagor 8055i FL V01.31, but i can not drilling process because 'cnc 0182 error' bring out...."G81 option not available". it's same as G81 G82 G83 G69.
This machine is only useable G84 code in drill canned cycles
How to solve like this trouble ?
And how to version update fagor 8055M software v01.31 to v01.65?
Thanks everybody!!
Results 1 to 3 of 3
-
03-22-2024, 04:46 AM #1
Member
- Join Date
- Oct 2013
- Posts
- 3
How to solve..fagor 8055i FL V01.31...."G81 option not available"
-
03-22-2024, 04:49 AM #2
Member
- Join Date
- Oct 2013
- Posts
- 3
Re: How to solve..fagor 8055i FL V01.31...."G81 option not available"
general parameter P186 modify ( 0000 0000 0000 0000 to 0000 0000 0000 1111 )....refer '8055 install manual'
but it is no effect.
-
03-25-2024, 04:12 AM #3
Member
- Join Date
- Oct 2013
- Posts
- 3
Re: How to solve..fagor 8055i FL V01.31...."G81 option not available"
I know just a few days why could not run drill canned cycles......Because fagor 8055 GP option installed in my machine. this option is not drill canned cycles process of cnc software.
I think how to install drill canned cycles software like as 'add in module program'
Thanks very much, reply to my question.!!! panket ^^
Reply With Quote
Posting Permissions
