I would like a quote on some small pins going to 12962 zip. I have a dxf and Fusion 360 file. There's no shear or wear so 1018 I imagine will work. Looking for quote on 25 or 50 pieces first run. Thanks
Thread: Small Pins needed North East
Results 1 to 6 of 6
-
03-27-2024, 03:59 PM #1
- Join Date
- Mar 2024
- Posts
- 2
Small Pins needed North East
-
03-27-2024, 05:27 PM #2
- Join Date
- Mar 2024
- Posts
- 2
Re: Small Pins needed North East
So I see the F3D file isnt supported but I will email it to anyone interested. Size is approximately 29mm x 7.65mm
-
04-02-2024, 09:52 PM #3
Registered
- Join Date
- Apr 2014
- Posts
- 345
Re: Small Pins needed North East
Says you can’t receive pms so send me a pm and I’ll shoot my contact info over
-
04-10-2024, 01:39 AM #4
- Join Date
- Feb 2024
- Posts
- 1
Re: Small Pins needed North East
Bpfohler, was ianagos able to help you out? I'd be available too if not.
-
04-11-2024, 08:35 AM #5
Member
- Join Date
- Apr 2024
- Posts
- 3
Re: Small Pins needed North East
Hello. Send me your files to [email protected]
I'll offer a quote to you. Thanks
-
04-21-2024, 02:02 AM #6
Member
- Join Date
- Feb 2023
- Posts
- 9
Re: Small Pins needed North East
could send me email: [email protected]
Reply With QuoteSimilar Threads
-
Tooling for small diameter pins needed.
By BTC 111 in forum CNC Swiss Screw MachinesReplies: 7Last Post: 05-16-2014, 11:23 PM -
Information needed about North East Electronics MC3E
By danhedges in forum Controller & Computer SolutionsReplies: 1Last Post: 08-06-2012, 04:42 AM -
Anodizer in the North East needed
By snovak240 in forum Material Machining SolutionsReplies: 4Last Post: 05-01-2012, 09:16 PM -
North East Kansas
By tdnp in forum Mentors & Apprentice LocatorReplies: 0Last Post: 10-13-2007, 04:37 PM -
HAAS Service in the North East
By serviceman in forum News AnnouncementsReplies: 8Last Post: 08-22-2007, 10:59 PM
Tags for this Thread
Posting Permissions
