586,089 active members*
3,924 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > XYZ Gantry Routers > AXYZ Router 8153 model PANELBUILDER SENSOR ISSUE!

Thread: AXYZ Router 8153 model PANELBUILDER SENSOR ISSUE!

Results 1 to 1 of 1
  1. 03-27-2024, 09:42 PM #1
    axyzrouterguy
    axyzrouterguy is offline
    Join Date
    Oct 2023
    Posts
    2

    AXYZ Router 8153 model PANELBUILDER SENSOR ISSUE!

    Every since I bought the cnc router I had no issue since I received AXYZ Basic Router Training, however one of my spindles is too high not allowing me to seek the machine origin (F.13) blocking the Z sensor. I then get displayed with the error code 101 on the smart console, does anyone know how I would be able to lower the spindle to see if that is blocking the sensor?
    Attached Thumbnails Attached Thumbnails IMG_0907.jpg   IMG_0908.jpg   IMG_0904.jpg   IMG_0903.jpg  

    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Any members here have this AXYZ - Smouse Surface Tooltip Sensor?
    By T2creative in forum CNC4PC
    Replies: 0
    Last Post: 02-24-2023, 11:07 PM
  2. AXYZ Router Issue
    By 300IndustriesAMR in forum XYZ Gantry Routers
    Replies: 1
    Last Post: 07-29-2020, 09:11 PM
  3. Requesting help with AXYZ Router issue...
    By MauserBob in forum Commercial CNC Wood Routers
    Replies: 4
    Last Post: 02-15-2019, 07:03 AM
  4. AXYZ ToolPath issue
    By VTX1800 in forum Commercial CNC Wood Routers
    Replies: 6
    Last Post: 08-28-2018, 07:18 PM
  5. AXYZ Automation ToolPath Software Issue
    By VTX1800 in forum XYZ Gantry Routers
    Replies: 2
    Last Post: 03-15-2018, 11:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules