[Fabricator08]

Few questions, I finally got everything hooked up but got a few problems and questions.

First off the machine wont move negative, it keeps saying reached machine limits. I dont run limit switches and need to be able to move machine where ever I need. All the axis letters are red. How do I get this to work?

What should motor steps be set at? Im running 200 steps per rev steppers.

SW4 in the stepper controller says on half current, off full current. I have it set at 3.8A, with it off is it only doing 1.9A?

Pics included to help

[PlanetCNC]

Here are tutorials that you need:
https://cnc.zone/kb/tutorials/tutorials

Your questions are answered here:
https://cnc.zone/kb/tutorials/basic/...or_soft_limits
and here:
https://cnc.zone/kb/tutorials/essent...steps_per_unit