on the meldas control how does the servo over ride work.. i have an axis hard on the limit switch and i cant seem to move the y axis away from it..
on the meldas control how does the servo over ride work.. i have an axis hard on the limit switch and i cant seem to move the y axis away from it..
Press and hold the overtravel release button without releasing it.
At the same time, in the handwheel mode, select the Y-axis and move the Y-axis back in the opposite direction to the overtravel,
until the Y axis get away from the limit switch.
Then press the reset button to clear the alarm.
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html