[impi62]

Hello. Is there someone who can help me with Carousel type ATC. Ive been struggling along for weeks with this. I have fitted a carousel type ATC to my mill running Mk3/9
The corousel is driven by servo motor.
If im correct in my thinking, once the carousel is homed and at position 1, the rest of the tools will be at a certain degree of rotation of the carousel? So for a 12 position carousel that would be every 30 degrees? Sounds pretty straight forward unless im over simplifying this? If this is indeed the case, what im having an issue with is in the tool table theres only options to assign XYZ to the tool. No option for rotary axis in degrees? Ive searched the internet for weeks and find very little info on planet cnc with carousel. Found a video with a geneva drive (not rotary) and a video in German which ive looked at over and over and cant make sense of. If there someone who can shed some light id be truly grateful

Thank you in advance

[PlanetCNC]

You cam modify M6 script to add carousel rotation.

[pankniru]

Hello. Is there someone who can help me with Carousel type ATC. Ive been struggling along for weeks with this. I have fitted a carousel type ATC to my mill running Mk3/9
The corousel is driven by servo motor.
If im correct in my thinking, once the carousel is homed and at position 1, the rest of the tools will be at a certain degree of rotation of the carousel? So for a 12 position carousel that would be every 30 degrees? Sounds pretty straight forward unless im over simplifying this? If this is indeed the case, what im having an issue with is in the tool table theres only options to assign XYZ to the tool. No option for rotary axis in degrees? Ive searched the internet for weeks and find very little info on planet cnc with carousel. Found a video with a geneva drive (not rotary) and a video in German which ive looked at over and over and cant make sense of. If there someone who can shed some light id be truly grateful

Thank you in advance

Which controller you using ??? explain me everything at [email protected]

[impi62]

Thank you. Yes i figured that, but dont know how to modify script. Thats exactly what i need help with. Maybe if i can see a working M6 script with carousel so i can get an idea to modify for my use....
When i look at default M6 script i dont see anything about carousel

[PlanetCNC]

I recommend taking a look at the M6 script file code, and locate the "Move To" section. Here you can add the move lines of gcode for your A axis.


Guide on how to access script code:
https://cnc.zone/kb/tutorials/easy/how_to_edit_built-in_script_files

[impi62]

Thank you for reply. I tried this. I added tool at top of script and at the point in the script "Move To" I added the line G53 G00 A#<tool>
So that seems to do something right. When i run the script the A axis moves to "20". But now how do I add other tool locations? I tried adding a tool at A=40 as below but how to point to that in script when tool No.2 is called?


#<tool> = 20.000 (Tool No.1)
;#<tool> = 40.000 (Tool No.2)


o<chk> if[LNOT[ACTIVE[]]]
M6
M99
o<chk> endif


o<chk> if [LNOT[#<_tc_enable>]]
M6
M99
o<chk> endif


o<PlanetCNC> if[[#<_tc_toolmeasure>] AND [#<_probe_pin_1> EQ 0] AND [#<_probe_pin_2> EQ 0]]
(msg,Sensor is not configured)
M2
o<PlanetCNC> endif


M73
G17 G08 G15 G90 G91.1 G90.2 G94
M50P0
M55P0
M56P0
M57P0
M10P1
M11P1


(print,Toolchange)
#<toisset>=0
#<wstarta> = #<_a>
#<wstarty> = #<_y>
#<wstartz> = #<_z>


#<spindle> = #<_spindle>
o<sp> if [#<_tc_spindlecheck> AND [#<spindle> NE 5]]
(print, Spindle is ON)
M5
o<sp> endif


o<st> if [#<_tc_skipsame> AND [#<_current_tool> EQ #<_selected_tool>]]
(print, Skip same tool)
M99
o<st> endif


o<sh> if [#<_tc_safeheight_en>]
(print, Move to safe height)
G53 G00 Z#<_tc_safeheight>
o<sh> endif


;o<po> if [#<_tc_pos_en>]
;(print, Move to position)
;o<sh> if [#<_tc_safeheight_en>]
;G53 G00 A#<test_a> Y#<_tc_pos_y>
;G53 G00 Z#<_tc_pos_z>

o<sh> if [#<_tc_safeheight_en>]
G53 G00 A#<tool>
o<sh> endif
;o<po> endif
G09


o<ac> if [AND[#<_tc_action>, 1]]
o<tn> if [#<_toolchangename>]
(msg,Change tool to\ $<toolchangename>)
o<tn> else
(msg,Change tool:\ #<_current_tool,0>: $<current_toolname>\to\ #<_selected_tool,0>: $<selected_toolname>)
o<tn> endif
o<ac> else
o<tn> if [#<_toolchangename>]
(print, Change tool to $<toolchangename>)
o<tn> else
(print, Change tool #<_current_tool,0> to #<_selected_tool,0>)
o<tn> endif
o<ac> endif
o<ac> if [AND[#<_tc_action>, 2]]
M0
o<ac> endif
G09


o<atcen> if [#<_tc_atc_en>]
(print, ATC enabled)
o<un> if [#<_current_tool> GT 0]
(print, Unload tool #<_current_tool,0>)
o<ex> if [#<_tool_exists|#<_current_tool>> EQ 0]
(msg,Current tool #<_current_tool,0> does not exist in tool table)
M2
o<ex> endif


o<skp> if [#<_tool_skipchange_num|#<_current_tool>> EQ 0]
#<unposx> = #<_tool_tc_x_num|#<_current_tool>>
#<unposy> = #<_tool_tc_y_num|#<_current_tool>>
#<unposz> = #<_tool_tc_z_num|#<_current_tool>>
#<unposx_in1> = [#<unposx> - #<_tc_unload_in1_x>]
#<unposy_in1> = [#<unposy> - #<_tc_unload_in1_y>]
#<unposz_in1> = [#<unposz> - #<_tc_unload_in1_z>]
#<unposx_in2> = [#<unposx_in1> - #<_tc_unload_in2_x>]
#<unposy_in2> = [#<unposy_in1> - #<_tc_unload_in2_y>]
#<unposz_in2> = [#<unposz_in1> - #<_tc_unload_in2_z>]
(print, Unload in2 position X#<unposx_in2> Y#<unposy_in2> Z#<unposz_in2>)
(print, Unload in1 position X#<unposx_in1> Y#<unposy_in1> Z#<unposz_in1>)
(print, Unload position X#<unposx> Y#<unposy> Z#<unposz>)
o<unpos> if [#<_tc_safeheight_en>]
G53 G00 X#<unposx_in2> Y#<unposy_in2>
G53 G00 Z#<unposz_in2>
o<unpos> else
G53 G00 X#<unposx_in2> Y#<unposy_in2> Z#<unposz_in2>
o<unpos> endif
G53 G01 X#<unposx_in1> Y#<unposy_in1> Z#<unposz_in1> F#<_tc_atc_speed2>
G53 G01 X#<unposx> Y#<unposy> Z#<unposz> F#<_tc_atc_speed>


o<unp11> if [[#<_tc_unload_pin1> GT 0] AND [#<_tc_unload_pin1set1> GT 0]]
M62 P#<_tc_unload_pin1> Q[#<_tc_unload_pin1set1>-1]
o<unp11> endif
o<und11> if [#<_tc_unload_pin1delay1> GT 0]
G04 P#<_tc_unload_pin1delay1>
o<und11> endif
o<unp12> if [[#<_tc_unload_pin1> GT 0] AND [#<_tc_unload_pin1set2> GT 0]]
M62 P#<_tc_unload_pin1> Q[#<_tc_unload_pin1set2>-1]
o<unp12> endif
o<und12> if [#<_tc_unload_pin1delay2> GT 0]
G04 P#<_tc_unload_pin1delay2>
o<und12> endif


o<unp21> if [[#<_tc_unload_pin2> GT 0] AND [#<_tc_unload_pin2set1> GT 0]]
M62 P#<_tc_unload_pin2> Q[#<_tc_unload_pin2set1>-1]
o<unp21> endif
o<und21> if [#<_tc_unload_pin2delay1> GT 0]
G04 P#<_tc_unload_pin2delay1>
o<und21> endif
o<unp22> if [[#<_tc_unload_pin2> GT 0] AND [#<_tc_unload_pin2set2> GT 0]]
M62 P#<_tc_unload_pin2> Q[#<_tc_unload_pin2set2>-1]
o<unp22> endif
o<und22> if [#<_tc_unload_pin2delay2> GT 0]
G04 P#<_tc_unload_pin2delay2>
o<und22> endif


#<unposx_out1> = [#<unposx> + #<_tc_unload_out1_x>]
#<unposy_out1> = [#<unposy> + #<_tc_unload_out1_y>]
#<unposz_out1> = [#<unposz> + #<_tc_unload_out1_z>]
#<unposx_out2> = [#<unposx_out1> + #<_tc_unload_out2_x>]
#<unposy_out2> = [#<unposy_out1> + #<_tc_unload_out2_y>]
#<unposz_out2> = [#<unposz_out1> + #<_tc_unload_out2_z>]
(print, Unload out1 position X#<unposx_out1> Y#<unposy_out1> Z#<unposz_out1>)
(print, Unload out2 position X#<unposx_out2> Y#<unposy_out2> Z#<unposz_out2>)
G53 G01 X#<unposx_out1> Y#<unposy_out1> Z#<unposz_out1> F#<_tc_atc_speed>
G53 G01 X#<unposx_out2> Y#<unposy_out2> Z#<unposz_out2> F#<_tc_atc_speed2>
o<sh> if [#<_tc_safeheight_en>]
G53 G00 Z#<_tc_safeheight>
o<sh> endif
o<skp> endif
o<un> endif


o<ld> if [#<_selected_tool> GT 0]
(print, Load tool #<_selected_tool,0>)
o<ex> if [#<_tool_exists|#<_selected_tool>> EQ 0]
(msg,Selected tool #<_selected_tool,0> does not exist in tool table)
M2
o<ex> endif


o<skp> if [#<_tool_skipchange_num|#<_selected_tool>> EQ 0]
#<ldposx> = #<_tool_tc_x_num|#<_selected_tool>>
#<ldposy> = #<_tool_tc_y_num|#<_selected_tool>>
#<ldposz> = #<_tool_tc_z_num|#<_selected_tool>>
#<ldposx_in1> = [#<ldposx> - #<_tc_load_in1_x>]
#<ldposy_in1> = [#<ldposy> - #<_tc_load_in1_y>]
#<ldposz_in1> = [#<ldposz> - #<_tc_load_in1_z>]
#<ldposx_in2> = [#<ldposx_in1> - #<_tc_load_in2_x>]
#<ldposy_in2> = [#<ldposy_in1> - #<_tc_load_in2_y>]
#<ldposz_in2> = [#<ldposz_in1> - #<_tc_load_in2_z>]
(print, Load in2 position X#<ldposx_in2> Y#<ldposy_in2> Z#<ldposz_in2>)
(print, Load in1 position X#<ldposx_in1> Y#<ldposy_in1> Z#<ldposz_in1>)
(print, Load position X#<ldposx> Y#<ldposy> Z#<ldposz>)
o<ldpos> if [#<_tc_safeheight_en>]
G53 G00 X#<ldposx_in2> Y#<ldposy_in2>
G53 G00 Z#<ldposz_in2>
o<ldpos> else
G53 G00 X#<ldposx_in2> Y#<ldposy_in2> Z#<ldposz_in2>
o<ldpos> endif
G53 G01 X#<ldposx_in1> Y#<ldposy_in1> Z#<ldposz_in1> F#<_tc_atc_speed2>
G53 G01 X#<ldposx> Y#<ldposy> Z#<ldposz> F#<_tc_atc_speed>


o<ldp11> if [[#<_tc_load_pin1> GT 0] AND [#<_tc_load_pin1set1> GT 0]]
M62 P#<_tc_load_pin1> Q[#<_tc_load_pin1set1>-1]
o<ldp11> endif
o<ldd11> if [#<_tc_load_pin1delay1> GT 0]
G04 P#<_tc_load_pin1delay1>
o<ldd11> endif
o<ldp12> if [[#<_tc_load_pin1> GT 0] AND [#<_tc_load_pin1set2> GT 0]]
M62 P#<_tc_load_pin1> Q[#<_tc_load_pin1set2>-1]
o<ldp12> endif
o<ldd12> if [#<_tc_load_pin1delay2> GT 0]
G04 P#<_tc_load_pin1delay2>
o<ldd12> endif


o<ldp21> if [[#<_tc_load_pin2> GT 0] AND [#<_tc_load_pin2set1> GT 0]]
M62 P#<_tc_load_pin2> Q[#<_tc_load_pin2set1>-1]
o<ldp21> endif
o<ldd21> if [#<_tc_load_pin2delay1> GT 0]
G04 P#<_tc_load_pin2delay1>
o<ldd21> endif
o<ldp22> if [[#<_tc_load_pin2> GT 0] AND [#<_tc_load_pin2set2> GT 0]]
M62 P#<_tc_load_pin2> Q[#<_tc_load_pin2set2>-1]
o<ldp22> endif
o<ldd22> if [#<_tc_load_pin2delay2> GT 0]
G04 P#<_tc_load_pin2delay2>
o<ldd22> endif


#<ldposx_out1> = [#<ldposx> + #<_tc_load_out1_x>]
#<ldposy_out1> = [#<ldposy> + #<_tc_load_out1_y>]
#<ldposz_out1> = [#<ldposz> + #<_tc_load_out1_z>]
#<ldposx_out2> = [#<ldposx_out1> + #<_tc_load_out2_x>]
#<ldposy_out2> = [#<ldposy_out1> + #<_tc_load_out2_y>]
#<ldposz_out2> = [#<ldposz_out1> + #<_tc_load_out2_z>]
(print, Unload out1 position X#<ldposx_out1> Y#<ldposy_out1> Z#<ldposz_out1>)
(print, Unload out2 position X#<ldposx_out2> Y#<ldposy_out2> Z#<ldposz_out2>)
G53 G01 X#<ldposx_out1> Y#<ldposy_out1> Z#<ldposz_out1> F#<_tc_atc_speed>
G53 G01 X#<ldposx_out2> Y#<ldposy_out2> Z#<ldposz_out2> F#<_tc_atc_speed2>
o<sh> if [#<_tc_safeheight_en>]
G53 G00 Z#<_tc_safeheight>
o<sh> endif


o<skp> endif
o<ld> endif


M6
o<atcen> else
M6
o<atcen> endif


o<tm> if [[#<_tc_toolmeasure> GT 0] AND [#<_tool_skipmeasure_num|#<_current_tool>> EQ 0]]
G09
(print, Measure tool)
#<sox> = [DEF[#<_tool_so_x_num|#<_current_tool>>,0]]
#<soy> = [DEF[#<_tool_so_y_num|#<_current_tool>>,0]]
#<soz> = [DEF[#<_tool_so_z_num|#<_current_tool>>,0]]


G53 G00 Z#<_tooloff_safeheight>
G53 G00 X[#<_tooloff_sensorx> - #<sox>] Y[#<_tooloff_sensory> - #<soy>]
G53 G00 Z#<_tooloff_rapidheight>


M11P0
G53 G38.2 Z-100000 F#<_tooloff_speed>
G91 G53 G01 Z[+#<_tooloff_swdist>]
o<low> if [#<_tooloff_speed_low> GT 0]
G90 G53 G38.2 Z-100000 F#<_tooloff_speed_low>
G91 G53 G01 Z[+#<_tooloff_swdist>] F#<_tooloff_speed>
o<low> endif
M11P1 G90


G53 G00 Z#<_tooloff_safeheight>
o<chk> if[ACTIVE[] AND NOTEXISTS[#<_probe_z>]]
(msg,Measuring failed)
M2
o<chk> endif


#<off> = [#<_probe_z> - #<_tooloff_sensorz> - #<soz>]


o<tmset> if [#<_tc_toolmeasure> EQ 2]
(print, Set tooltable Z#<off>)
G10 L1 P#<_current_tool> Z#<off>
#<toisset>=2
o<tmset> elseif [#<_tc_toolmeasure> EQ 1]
(print, Set tool offset Z#<off>)
G43.1 Z#<off>
#<toisset>=1
o<tmset> endif
o<tm> endif


o<toen> if [#<_tc_tooloff_en>]
M72
M71
(print, Enable tool offset)
o<tois> if [#<_tc_tooloff_en> EQ 2]
G43
o<tois> elseif [#<_tc_tooloff_en> EQ 1]
G43.1
o<tois> endif
o<toen> endif


o<ar> if [#<_tc_autoreturn>]
(print,AutoReturn)
o<chk> if [#<_z> LT #<wstartz>]
G00 Z#<wstartz>
o<chk> endif
G00 X#<wstartx> Y#<wstarty>
G00 Z#<wstartz>
o<ar> endif


o<sp> if [#<_tc_spindlecheck> AND [#<spindle> EQ 3]]
(print, Turn spindle CW)
M3
o<sp> elseif [#<_tc_spindlecheck> AND [#<spindle> EQ 4]]
(print, Turn spindle CCW)
M4
o<sp> endif

[PlanetCNC]

You can use custom parameter from your tool table to store A value for each tool.
https://cnc.zone/tng/parameters/param-_tool_par1_num
https://cnc.zone/tng/machine_menu/ma...l_table-custom

[impi62]

_tool_par1_num, _tool_par2_num, _tool_par3_num

Must i put this parameters.txt?
I already set tool 1 to par1

[impi62]

These are changes to script - see below in purple

Must i add _tool_par1_num to the parameter.txt file? and what is num??

o<chk> if[LNOT[ACTIVE[]]]
M6
M99
o<chk> endif


o<chk> if [LNOT[#<_tc_enable>]]
M6
M99
o<chk> endif


o<PlanetCNC> if[[#<_tc_toolmeasure>] AND [#<_probe_pin_1> EQ 0] AND [#<_probe_pin_2> EQ 0]]
(msg,Sensor is not configured)
M2
o<PlanetCNC> endif


M73
G17 G08 G15 G90 G91.1 G90.2 G94
M50P0
M55P0
M56P0
M57P0
M10P1
M11P1


(print,Toolchange)
#<toisset>=0
#<wstarta> = #<_a>
#<wstarty> = #<_y>
#<wstartz> = #<_z>


#<spindle> = #<_spindle>
o<sp> if [#<_tc_spindlecheck> AND [#<spindle> NE 5]]
(print, Spindle is ON)
M5
o<sp> endif


o<st> if [#<_tc_skipsame> AND [#<_current_tool> EQ #<_selected_tool>]]
(print, Skip same tool)
M99
o<st> endif


o<sh> if [#<_tc_safeheight_en>]
(print, Move to safe height)
G53 G00 Z#<_tc_safeheight>
o<sh> endif


o<po> if [#<_tc_pos_en>]
(print, Move to position)
o<sh> if [#<_tc_safeheight_en>]
G53 G00 A#<_tc_pos_a> Y#<_tc_pos_y>
G53 G00 Z#<_tc_pos_z>
o<sh> else
G53 G00 A#<_tc_pos_a> Y#<_tc_pos_y> Z#<_tc_pos_z>
o<sh> endif
o<po> endif
G09


o<ac> if [AND[#<_tc_action>, 1]]
o<tn> if [#<_toolchangename>]
(msg,Change tool to\ $<toolchangename>)
o<tn> else
(msg,Change tool:\ #<_current_tool,0>: $<current_toolname>\to\ #<_selected_tool,0>: $<selected_toolname>)
o<tn> endif
o<ac> else
o<tn> if [#<_toolchangename>]
(print, Change tool to $<toolchangename>)
o<tn> else
(print, Change tool #<_current_tool,0> to #<_selected_tool,0>)
o<tn> endif
o<ac> endif
o<ac> if [AND[#<_tc_action>, 2]]
M0
o<ac> endif
G09


o<atcen> if [#<_tc_atc_en>]
(print, ATC enabled)
o<un> if [#<_current_tool> GT 0]
(print, Unload tool #<_current_tool,0>)
o<ex> if [#<_tool_exists|#<_current_tool>> EQ 0]
(msg,Current tool #<_current_tool,0> does not exist in tool table)
M2
o<ex> endif


o<skp> if [#<_tool_skipchange_num|#<_current_tool>> EQ 0]
#<unposx> = #<_tool_tc_x_num|#<_current_tool>>
#<unposy> = #<_tool_tc_y_num|#<_current_tool>>
#<unposz> = #<_tool_tc_z_num|#<_current_tool>>
#<unposx_in1> = [#<unposx> - #<_tc_unload_in1_x>]
#<unposy_in1> = [#<unposy> - #<_tc_unload_in1_y>]
#<unposz_in1> = [#<unposz> - #<_tc_unload_in1_z>]
#<unposx_in2> = [#<unposx_in1> - #<_tc_unload_in2_x>]
#<unposy_in2> = [#<unposy_in1> - #<_tc_unload_in2_y>]
#<unposz_in2> = [#<unposz_in1> - #<_tc_unload_in2_z>]
(print, Unload in2 position X#<unposx_in2> Y#<unposy_in2> Z#<unposz_in2>)
(print, Unload in1 position X#<unposx_in1> Y#<unposy_in1> Z#<unposz_in1>)
(print, Unload position X#<unposx> Y#<unposy> Z#<unposz>)
o<unpos> if [#<_tc_safeheight_en>]
G53 G00 X#<unposx_in2> Y#<unposy_in2>
G53 G00 Z#<unposz_in2>
o<unpos> else
G53 G00 X#<unposx_in2> Y#<unposy_in2> Z#<unposz_in2>
o<unpos> endif
G53 G01 X#<unposx_in1> Y#<unposy_in1> Z#<unposz_in1> F#<_tc_atc_speed2>
G53 G01 X#<unposx> Y#<unposy> Z#<unposz> F#<_tc_atc_speed>


o<unp11> if [[#<_tc_unload_pin1> GT 0] AND [#<_tc_unload_pin1set1> GT 0]]
M62 P#<_tc_unload_pin1> Q[#<_tc_unload_pin1set1>-1]
o<unp11> endif
o<und11> if [#<_tc_unload_pin1delay1> GT 0]
G04 P#<_tc_unload_pin1delay1>
o<und11> endif
o<unp12> if [[#<_tc_unload_pin1> GT 0] AND [#<_tc_unload_pin1set2> GT 0]]
M62 P#<_tc_unload_pin1> Q[#<_tc_unload_pin1set2>-1]
o<unp12> endif
o<und12> if [#<_tc_unload_pin1delay2> GT 0]
G04 P#<_tc_unload_pin1delay2>
o<und12> endif


o<unp21> if [[#<_tc_unload_pin2> GT 0] AND [#<_tc_unload_pin2set1> GT 0]]
M62 P#<_tc_unload_pin2> Q[#<_tc_unload_pin2set1>-1]
o<unp21> endif
o<und21> if [#<_tc_unload_pin2delay1> GT 0]
G04 P#<_tc_unload_pin2delay1>
o<und21> endif
o<unp22> if [[#<_tc_unload_pin2> GT 0] AND [#<_tc_unload_pin2set2> GT 0]]
M62 P#<_tc_unload_pin2> Q[#<_tc_unload_pin2set2>-1]
o<unp22> endif
o<und22> if [#<_tc_unload_pin2delay2> GT 0]
G04 P#<_tc_unload_pin2delay2>
o<und22> endif


#<unposx_out1> = [#<unposx> + #<_tc_unload_out1_x>]
#<unposy_out1> = [#<unposy> + #<_tc_unload_out1_y>]
#<unposz_out1> = [#<unposz> + #<_tc_unload_out1_z>]
#<unposx_out2> = [#<unposx_out1> + #<_tc_unload_out2_x>]
#<unposy_out2> = [#<unposy_out1> + #<_tc_unload_out2_y>]
#<unposz_out2> = [#<unposz_out1> + #<_tc_unload_out2_z>]
(print, Unload out1 position X#<unposx_out1> Y#<unposy_out1> Z#<unposz_out1>)
(print, Unload out2 position X#<unposx_out2> Y#<unposy_out2> Z#<unposz_out2>)
G53 G01 X#<unposx_out1> Y#<unposy_out1> Z#<unposz_out1> F#<_tc_atc_speed>
G53 G01 X#<unposx_out2> Y#<unposy_out2> Z#<unposz_out2> F#<_tc_atc_speed2>
o<sh> if [#<_tc_safeheight_en>]
G53 G00 Z#<_tc_safeheight>
o<sh> endif
o<skp> endif
o<un> endif


o<ld> if [#<_selected_tool> GT 0]
(print, Load tool #<_selected_tool,0>)
o<ex> if [#<_tool_exists|#<_selected_tool>> EQ 0]
(msg,Selected tool #<_selected_tool,0> does not exist in tool table)
M2
o<ex> endif


o<skp> if [#<_tool_skipchange_num|#<_selected_tool>> EQ 0]
#<ldposx> = #<_tool_tc_x_num|#<_selected_tool>>
#<ldposy> = #<_tool_tc_y_num|#<_selected_tool>>
#<ldposz> = #<_tool_tc_z_num|#<_selected_tool>>
#<ldposx_in1> = [#<ldposx> - #<_tc_load_in1_x>]
#<ldposy_in1> = [#<ldposy> - #<_tc_load_in1_y>]
#<ldposz_in1> = [#<ldposz> - #<_tc_load_in1_z>]
#<ldposx_in2> = [#<ldposx_in1> - #<_tc_load_in2_x>]
#<ldposy_in2> = [#<ldposy_in1> - #<_tc_load_in2_y>]
#<ldposz_in2> = [#<ldposz_in1> - #<_tc_load_in2_z>]
(print, Load in2 position X#<ldposx_in2> Y#<ldposy_in2> Z#<ldposz_in2>)
(print, Load in1 position X#<ldposx_in1> Y#<ldposy_in1> Z#<ldposz_in1>)
(print, Load position X#<ldposx> Y#<ldposy> Z#<ldposz>)
o<ldpos> if [#<_tc_safeheight_en>]
G53 G00 X#<ldposx_in2> Y#<ldposy_in2>
G53 G00 Z#<ldposz_in2>
o<ldpos> else
G53 G00 X#<ldposx_in2> Y#<ldposy_in2> Z#<ldposz_in2>
o<ldpos> endif
G53 G01 X#<ldposx_in1> Y#<ldposy_in1> Z#<ldposz_in1> F#<_tc_atc_speed2>
G53 G01 X#<ldposx> Y#<ldposy> Z#<ldposz> F#<_tc_atc_speed>


o<ldp11> if [[#<_tc_load_pin1> GT 0] AND [#<_tc_load_pin1set1> GT 0]]
M62 P#<_tc_load_pin1> Q[#<_tc_load_pin1set1>-1]
o<ldp11> endif
o<ldd11> if [#<_tc_load_pin1delay1> GT 0]
G04 P#<_tc_load_pin1delay1>
o<ldd11> endif
o<ldp12> if [[#<_tc_load_pin1> GT 0] AND [#<_tc_load_pin1set2> GT 0]]
M62 P#<_tc_load_pin1> Q[#<_tc_load_pin1set2>-1]
o<ldp12> endif
o<ldd12> if [#<_tc_load_pin1delay2> GT 0]
G04 P#<_tc_load_pin1delay2>
o<ldd12> endif


o<ldp21> if [[#<_tc_load_pin2> GT 0] AND [#<_tc_load_pin2set1> GT 0]]
M62 P#<_tc_load_pin2> Q[#<_tc_load_pin2set1>-1]
o<ldp21> endif
o<ldd21> if [#<_tc_load_pin2delay1> GT 0]
G04 P#<_tc_load_pin2delay1>
o<ldd21> endif
o<ldp22> if [[#<_tc_load_pin2> GT 0] AND [#<_tc_load_pin2set2> GT 0]]
M62 P#<_tc_load_pin2> Q[#<_tc_load_pin2set2>-1]
o<ldp22> endif
o<ldd22> if [#<_tc_load_pin2delay2> GT 0]
G04 P#<_tc_load_pin2delay2>
o<ldd22> endif


#<ldposx_out1> = [#<ldposx> + #<_tc_load_out1_x>]
#<ldposy_out1> = [#<ldposy> + #<_tc_load_out1_y>]
#<ldposz_out1> = [#<ldposz> + #<_tc_load_out1_z>]
#<ldposx_out2> = [#<ldposx_out1> + #<_tc_load_out2_x>]
#<ldposy_out2> = [#<ldposy_out1> + #<_tc_load_out2_y>]
#<ldposz_out2> = [#<ldposz_out1> + #<_tc_load_out2_z>]
(print, Unload out1 position X#<ldposx_out1> Y#<ldposy_out1> Z#<ldposz_out1>)
(print, Unload out2 position X#<ldposx_out2> Y#<ldposy_out2> Z#<ldposz_out2>)
G53 G01 X#<ldposx_out1> Y#<ldposy_out1> Z#<ldposz_out1> F#<_tc_atc_speed>
G53 G01 X#<ldposx_out2> Y#<ldposy_out2> Z#<ldposz_out2> F#<_tc_atc_speed2>
o<sh> if [#<_tc_safeheight_en>]
G53 G00 Z#<_tc_safeheight>
o<sh> endif


o<skp> endif
o<ld> endif


M6
o<atcen> else
M6
o<atcen> endif


o<tm> if [[#<_tc_toolmeasure> GT 0] AND [#<_tool_skipmeasure_num|#<_current_tool>> EQ 0]]
G09
(print, Measure tool)
#<sox> = [DEF[#<_tool_so_x_num|#<_current_tool>>,0]]
#<soy> = [DEF[#<_tool_so_y_num|#<_current_tool>>,0]]
#<soz> = [DEF[#<_tool_so_z_num|#<_current_tool>>,0]]


G53 G00 Z#<_tooloff_safeheight>
G53 G00 X[#<_tooloff_sensorx> - #<sox>] Y[#<_tooloff_sensory> - #<soy>]
G53 G00 Z#<_tooloff_rapidheight>


M11P0
G53 G38.2 Z-100000 F#<_tooloff_speed>
G91 G53 G01 Z[+#<_tooloff_swdist>]
o<low> if [#<_tooloff_speed_low> GT 0]
G90 G53 G38.2 Z-100000 F#<_tooloff_speed_low>
G91 G53 G01 Z[+#<_tooloff_swdist>] F#<_tooloff_speed>
o<low> endif
M11P1 G90


G53 G00 Z#<_tooloff_safeheight>
o<chk> if[ACTIVE[] AND NOTEXISTS[#<_probe_z>]]
(msg,Measuring failed)
M2
o<chk> endif


#<off> = [#<_probe_z> - #<_tooloff_sensorz> - #<soz>]


o<tmset> if [#<_tc_toolmeasure> EQ 2]
(print, Set tooltable Z#<off>)
G10 L1 P#<_current_tool> Z#<off>
#<toisset>=2
o<tmset> elseif [#<_tc_toolmeasure> EQ 1]
(print, Set tool offset Z#<off>)
G43.1 Z#<off>
#<toisset>=1
o<tmset> endif
o<tm> endif


o<toen> if [#<_tc_tooloff_en>]
M72
M71
(print, Enable tool offset)
o<tois> if [#<_tc_tooloff_en> EQ 2]
G43
o<tois> elseif [#<_tc_tooloff_en> EQ 1]
G43.1
o<tois> endif
o<toen> endif


o<ar> if [#<_tc_autoreturn>]
(print,AutoReturn)
o<chk> if [#<_z> LT #<wstartz>]
G00 Z#<wstartz>
o<chk> endif
G00 X#<wstartx> Y#<wstarty>
G00 Z#<wstartz>
o<ar> endif


o<sp> if [#<_tc_spindlecheck> AND [#<spindle> EQ 3]]
(print, Turn spindle CW)
M3
o<sp> elseif [#<_tc_spindlecheck> AND [#<spindle> EQ 4]]
(print, Turn spindle CCW)
M4
o<sp> endif

[impi62]

Please can you give some kind of actual example. I'm struggling with this for weeks now

[impi62]

[impi62]

This is my M6 script now


o<chk> if[LNOT[ACTIVE[]]]
M6
M99
o<chk> endif


o<chk> if [LNOT[#<_tc_enable>]]
M6
M99
o<chk> endif


o<PlanetCNC> if[[#<_tc_toolmeasure>] AND [#<_probe_pin_1> EQ 0] AND [#<_probe_pin_2> EQ 0]]
(msg,Sensor is not configured)
M2
o<PlanetCNC> endif


M73
G17 G08 G15 G90 G91.1 G90.2 G94
M50P0
M55P0
M56P0
M57P0
M10P1
M11P1


(print,Toolchange)
#<toisset>=0
#<wstarta> = #<_a>
#<wstarty> = #<_y>
#<wstartz> = #<_z>


#<spindle> = #<_spindle>
o<sp> if [#<_tc_spindlecheck> AND [#<spindle> NE 5]]
(print, Spindle is ON)
M5
o<sp> endif


o<st> if [#<_tc_skipsame> AND [#<_current_tool> EQ #<_selected_tool>]]
(print, Skip same tool)
M99
o<st> endif


o<sh> if [#<_tc_safeheight_en>]
(print, Move to safe height)
G53 G00 Z#<_tc_safeheight>
o<sh> endif


o<po> if [#<_tc_pos_en>]
(print, Move to position)
o<sh> if [#<_tc_safeheight_en>]
G53 G00 A#<_tool_par1_num> Y#<_tc_pos_y>
G53 G00 Z#<_tc_pos_z>
o<sh> else
G53 G00 A#<_tool_par1_num> Y#<_tc_pos_y> Z#<_tc_pos_z>
o<sh> endif
o<po> endif
G09


o<ac> if [AND[#<_tc_action>, 1]]
o<tn> if [#<_toolchangename>]
(msg,Change tool to\ $<toolchangename>)
o<tn> else
(msg,Change tool:\ #<_current_tool,0>: $<current_toolname>\to\ #<_selected_tool,0>: $<selected_toolname>)
o<tn> endif
o<ac> else
o<tn> if [#<_toolchangename>]
(print, Change tool to $<toolchangename>)
o<tn> else
(print, Change tool #<_current_tool,0> to #<_selected_tool,0>)
o<tn> endif
o<ac> endif
o<ac> if [AND[#<_tc_action>, 2]]
M0
o<ac> endif
G09


o<atcen> if [#<_tc_atc_en>]
(print, ATC enabled)
o<un> if [#<_current_tool> GT 0]
(print, Unload tool #<_current_tool,0>)
o<ex> if [#<_tool_exists|#<_current_tool>> EQ 0]
(msg,Current tool #<_current_tool,0> does not exist in tool table)
M2
o<ex> endif


o<skp> if [#<_tool_skipchange_num|#<_current_tool>> EQ 0]
#<unposx> = #<_tool_tc_x_num|#<_current_tool>>
#<unposy> = #<_tool_tc_y_num|#<_current_tool>>
#<unposz> = #<_tool_tc_z_num|#<_current_tool>>
#<unposx_in1> = [#<unposx> - #<_tc_unload_in1_x>]
#<unposy_in1> = [#<unposy> - #<_tc_unload_in1_y>]
#<unposz_in1> = [#<unposz> - #<_tc_unload_in1_z>]
#<unposx_in2> = [#<unposx_in1> - #<_tc_unload_in2_x>]
#<unposy_in2> = [#<unposy_in1> - #<_tc_unload_in2_y>]
#<unposz_in2> = [#<unposz_in1> - #<_tc_unload_in2_z>]
(print, Unload in2 position X#<unposx_in2> Y#<unposy_in2> Z#<unposz_in2>)
(print, Unload in1 position X#<unposx_in1> Y#<unposy_in1> Z#<unposz_in1>)
(print, Unload position X#<unposx> Y#<unposy> Z#<unposz>)
o<unpos> if [#<_tc_safeheight_en>]
G53 G00 X#<unposx_in2> Y#<unposy_in2>
G53 G00 Z#<unposz_in2>
o<unpos> else
G53 G00 X#<unposx_in2> Y#<unposy_in2> Z#<unposz_in2>
o<unpos> endif
G53 G01 X#<unposx_in1> Y#<unposy_in1> Z#<unposz_in1> F#<_tc_atc_speed2>
G53 G01 X#<unposx> Y#<unposy> Z#<unposz> F#<_tc_atc_speed>


o<unp11> if [[#<_tc_unload_pin1> GT 0] AND [#<_tc_unload_pin1set1> GT 0]]
M62 P#<_tc_unload_pin1> Q[#<_tc_unload_pin1set1>-1]
o<unp11> endif
o<und11> if [#<_tc_unload_pin1delay1> GT 0]
G04 P#<_tc_unload_pin1delay1>
o<und11> endif
o<unp12> if [[#<_tc_unload_pin1> GT 0] AND [#<_tc_unload_pin1set2> GT 0]]
M62 P#<_tc_unload_pin1> Q[#<_tc_unload_pin1set2>-1]
o<unp12> endif
o<und12> if [#<_tc_unload_pin1delay2> GT 0]
G04 P#<_tc_unload_pin1delay2>
o<und12> endif


o<unp21> if [[#<_tc_unload_pin2> GT 0] AND [#<_tc_unload_pin2set1> GT 0]]
M62 P#<_tc_unload_pin2> Q[#<_tc_unload_pin2set1>-1]
o<unp21> endif
o<und21> if [#<_tc_unload_pin2delay1> GT 0]
G04 P#<_tc_unload_pin2delay1>
o<und21> endif
o<unp22> if [[#<_tc_unload_pin2> GT 0] AND [#<_tc_unload_pin2set2> GT 0]]
M62 P#<_tc_unload_pin2> Q[#<_tc_unload_pin2set2>-1]
o<unp22> endif
o<und22> if [#<_tc_unload_pin2delay2> GT 0]
G04 P#<_tc_unload_pin2delay2>
o<und22> endif


#<unposx_out1> = [#<unposx> + #<_tc_unload_out1_x>]
#<unposy_out1> = [#<unposy> + #<_tc_unload_out1_y>]
#<unposz_out1> = [#<unposz> + #<_tc_unload_out1_z>]
#<unposx_out2> = [#<unposx_out1> + #<_tc_unload_out2_x>]
#<unposy_out2> = [#<unposy_out1> + #<_tc_unload_out2_y>]
#<unposz_out2> = [#<unposz_out1> + #<_tc_unload_out2_z>]
(print, Unload out1 position X#<unposx_out1> Y#<unposy_out1> Z#<unposz_out1>)
(print, Unload out2 position X#<unposx_out2> Y#<unposy_out2> Z#<unposz_out2>)
G53 G01 X#<unposx_out1> Y#<unposy_out1> Z#<unposz_out1> F#<_tc_atc_speed>
G53 G01 X#<unposx_out2> Y#<unposy_out2> Z#<unposz_out2> F#<_tc_atc_speed2>
o<sh> if [#<_tc_safeheight_en>]
G53 G00 Z#<_tc_safeheight>
o<sh> endif
o<skp> endif
o<un> endif


o<ld> if [#<_selected_tool> GT 0]
(print, Load tool #<_selected_tool,0>)
o<ex> if [#<_tool_exists|#<_selected_tool>> EQ 0]
(msg,Selected tool #<_selected_tool,0> does not exist in tool table)
M2
o<ex> endif


o<skp> if [#<_tool_skipchange_num|#<_selected_tool>> EQ 0]
#<ldposx> = #<_tool_tc_x_num|#<_selected_tool>>
#<ldposy> = #<_tool_tc_y_num|#<_selected_tool>>
#<ldposz> = #<_tool_tc_z_num|#<_selected_tool>>
#<ldposx_in1> = [#<ldposx> - #<_tc_load_in1_x>]
#<ldposy_in1> = [#<ldposy> - #<_tc_load_in1_y>]
#<ldposz_in1> = [#<ldposz> - #<_tc_load_in1_z>]
#<ldposx_in2> = [#<ldposx_in1> - #<_tc_load_in2_x>]
#<ldposy_in2> = [#<ldposy_in1> - #<_tc_load_in2_y>]
#<ldposz_in2> = [#<ldposz_in1> - #<_tc_load_in2_z>]
(print, Load in2 position X#<ldposx_in2> Y#<ldposy_in2> Z#<ldposz_in2>)
(print, Load in1 position X#<ldposx_in1> Y#<ldposy_in1> Z#<ldposz_in1>)
(print, Load position X#<ldposx> Y#<ldposy> Z#<ldposz>)
o<ldpos> if [#<_tc_safeheight_en>]
G53 G00 X#<ldposx_in2> Y#<ldposy_in2>
G53 G00 Z#<ldposz_in2>
o<ldpos> else
G53 G00 X#<ldposx_in2> Y#<ldposy_in2> Z#<ldposz_in2>
o<ldpos> endif
G53 G01 X#<ldposx_in1> Y#<ldposy_in1> Z#<ldposz_in1> F#<_tc_atc_speed2>
G53 G01 X#<ldposx> Y#<ldposy> Z#<ldposz> F#<_tc_atc_speed>


o<ldp11> if [[#<_tc_load_pin1> GT 0] AND [#<_tc_load_pin1set1> GT 0]]
M62 P#<_tc_load_pin1> Q[#<_tc_load_pin1set1>-1]
o<ldp11> endif
o<ldd11> if [#<_tc_load_pin1delay1> GT 0]
G04 P#<_tc_load_pin1delay1>
o<ldd11> endif
o<ldp12> if [[#<_tc_load_pin1> GT 0] AND [#<_tc_load_pin1set2> GT 0]]
M62 P#<_tc_load_pin1> Q[#<_tc_load_pin1set2>-1]
o<ldp12> endif
o<ldd12> if [#<_tc_load_pin1delay2> GT 0]
G04 P#<_tc_load_pin1delay2>
o<ldd12> endif


o<ldp21> if [[#<_tc_load_pin2> GT 0] AND [#<_tc_load_pin2set1> GT 0]]
M62 P#<_tc_load_pin2> Q[#<_tc_load_pin2set1>-1]
o<ldp21> endif
o<ldd21> if [#<_tc_load_pin2delay1> GT 0]
G04 P#<_tc_load_pin2delay1>
o<ldd21> endif
o<ldp22> if [[#<_tc_load_pin2> GT 0] AND [#<_tc_load_pin2set2> GT 0]]
M62 P#<_tc_load_pin2> Q[#<_tc_load_pin2set2>-1]
o<ldp22> endif
o<ldd22> if [#<_tc_load_pin2delay2> GT 0]
G04 P#<_tc_load_pin2delay2>
o<ldd22> endif


#<ldposx_out1> = [#<ldposx> + #<_tc_load_out1_x>]
#<ldposy_out1> = [#<ldposy> + #<_tc_load_out1_y>]
#<ldposz_out1> = [#<ldposz> + #<_tc_load_out1_z>]
#<ldposx_out2> = [#<ldposx_out1> + #<_tc_load_out2_x>]
#<ldposy_out2> = [#<ldposy_out1> + #<_tc_load_out2_y>]
#<ldposz_out2> = [#<ldposz_out1> + #<_tc_load_out2_z>]
(print, Unload out1 position X#<ldposx_out1> Y#<ldposy_out1> Z#<ldposz_out1>)
(print, Unload out2 position X#<ldposx_out2> Y#<ldposy_out2> Z#<ldposz_out2>)
G53 G01 X#<ldposx_out1> Y#<ldposy_out1> Z#<ldposz_out1> F#<_tc_atc_speed>
G53 G01 X#<ldposx_out2> Y#<ldposy_out2> Z#<ldposz_out2> F#<_tc_atc_speed2>
o<sh> if [#<_tc_safeheight_en>]
G53 G00 Z#<_tc_safeheight>
o<sh> endif


o<skp> endif
o<ld> endif


M6
o<atcen> else
M6
o<atcen> endif


o<tm> if [[#<_tc_toolmeasure> GT 0] AND [#<_tool_skipmeasure_num|#<_current_tool>> EQ 0]]
G09
(print, Measure tool)
#<sox> = [DEF[#<_tool_so_x_num|#<_current_tool>>,0]]
#<soy> = [DEF[#<_tool_so_y_num|#<_current_tool>>,0]]
#<soz> = [DEF[#<_tool_so_z_num|#<_current_tool>>,0]]


G53 G00 Z#<_tooloff_safeheight>
G53 G00 X[#<_tooloff_sensorx> - #<sox>] Y[#<_tooloff_sensory> - #<soy>]
G53 G00 Z#<_tooloff_rapidheight>


M11P0
G53 G38.2 Z-100000 F#<_tooloff_speed>
G91 G53 G01 Z[+#<_tooloff_swdist>]
o<low> if [#<_tooloff_speed_low> GT 0]
G90 G53 G38.2 Z-100000 F#<_tooloff_speed_low>
G91 G53 G01 Z[+#<_tooloff_swdist>] F#<_tooloff_speed>
o<low> endif
M11P1 G90


G53 G00 Z#<_tooloff_safeheight>
o<chk> if[ACTIVE[] AND NOTEXISTS[#<_probe_z>]]
(msg,Measuring failed)
M2
o<chk> endif


#<off> = [#<_probe_z> - #<_tooloff_sensorz> - #<soz>]


o<tmset> if [#<_tc_toolmeasure> EQ 2]
(print, Set tooltable Z#<off>)
G10 L1 P#<_current_tool> Z#<off>
#<toisset>=2
o<tmset> elseif [#<_tc_toolmeasure> EQ 1]
(print, Set tool offset Z#<off>)
G43.1 Z#<off>
#<toisset>=1
o<tmset> endif
o<tm> endif


o<toen> if [#<_tc_tooloff_en>]
M72
M71
(print, Enable tool offset)
o<tois> if [#<_tc_tooloff_en> EQ 2]
G43
o<tois> elseif [#<_tc_tooloff_en> EQ 1]
G43.1
o<tois> endif
o<toen> endif


o<ar> if [#<_tc_autoreturn>]
(print,AutoReturn)
o<chk> if [#<_z> LT #<wstartz>]
G00 Z#<wstartz>
o<chk> endif
G00 X#<wstartx> Y#<wstarty>
G00 Z#<wstartz>
o<ar> endif


o<sp> if [#<_tc_spindlecheck> AND [#<spindle> EQ 3]]
(print, Turn spindle CW)
M3
o<sp> elseif [#<_tc_spindlecheck> AND [#<spindle> EQ 4]]
(print, Turn spindle CCW)
M4
o<sp> endif