[jon_fallon1]

Fadal 6030 for sale. It has been used for 90% aluminum machining, and is under power in Fallon, Nevada. Selling due to retirement.

Known issues:
- Top 1/3 line of upper line on monitor is not displayed due to monitor.

See attached recent ball-bar test for diagnostics table.

Features include:
- 21 Station Tool
- CAT 40 Taper
- 10,000 RPM
- 15 HP Spindle
- RS-232 Port
- X-Axis Travel - 60.0 inch
- Y-Axis Travel - 30.0 inch
- Z-Axis Travel - 30.0 inch
- Flood Coolant System
- Front enclosure slots for machining of larger parts.
- Under Power
- Machine Weight - ~18,000 pounds

Also included are various size tool holders, and two portable dust collectors that were used when machining non-metal materials.

Seller will disconnect and prep the machine for shipping, and load on truck. Buyer is responsible for shipping.

[RaderSidetrack]

Due to server issues, the images in post #1 failed to transfer to CNCZone properly, so I am putting them here:




3 images total.

[wendtmk]

Per the forum rules, you need to post a price for the machine or the post will be deleted.

Mark