Originally Posted by
tikka308
I just received what I believed was the full version of BobCad CAM 3D milling software. When I say "full version", I am referring to the fact that I asked the salesman if they sold different levels and he told me that "levels" only applied to advanced predator & the lathe module.
I just installed my software (with dongle) and am concerned because I do not have the Z-level rough or finish option. Upon further investigation in Help/License, I am showing only Level 1 of CAD, Mill & Other.
Am I missing something? Why do I not have full 3-axis ability? I was also certain that, per the website, my version would include Predator Simulation (or at least the first level of it)
Thanks.
BobCAD comes in one level for right now
The Mill Machining has 3 Levels
Lathe has 1 level
Predator Virtual CNC has 3 Levels
and Predator CNC Editor has 2 levels
These different levels are available but will cost extra. Call BCC sales as Tjones suggested and find out what is going on.
BTW: Predator Virtual CNC Level 1 is Extra unless you worked it into your original purchase. Other than that you have the base Predator simulator that can be found in the CAM Tree as follows.
Right click on Milling stock> Verify
A small window will open that you can stretch and start a verification of tool path.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com