I maybe able to get a Southwestern TRAK 1440P lathe. It has DRO but I'd like to convert it to 2 axis CNC.
Is there a definitive guide for doing this, or can someone point me to 'how-to' resources to undertake such a project?
Thanks
pwp
I maybe able to get a Southwestern TRAK 1440P lathe. It has DRO but I'd like to convert it to 2 axis CNC.
Is there a definitive guide for doing this, or can someone point me to 'how-to' resources to undertake such a project?
Thanks
pwp
Hi,
I was looking for information on the same topic. Here is a site that seems very interesting. This is for a 12" lathe, but may still be applicable for your lathe.
http://www.microkinetics.com/convkit.htm
David
I contacted them. It will cost $5295 to convert it. I guess I was hoping some had some plans that I could use.
Thx for the reply
Guys,
There are numerous of threads in the forums about converting or building a CNC-lathe. For example, check the subforum http://www.cnczone.com/forums/forumdisplay.php?f=221 and you will get a lot of useful information.
Just do it!
Regards,
Sven
SVEN, Thank you for the link. This is just the information I was looking for!
pwp