Originally Posted by pastera You can use a gas spring like 4138T56 from McMaster to build your own. Also, check the factory gib - they are normally junk and should be replaced. Aaron Aaron, can you post a link to where we can obtain new quality gibs? Thanks
Tonight, I measured how much my 'Y' tram was off. From the front rail on the table to the back rail on the table (about 3 inches) it's off by 7 thou. Phil
Originally Posted by BeerFizz Tonight, I measured how much my 'Y' tram was off. From the front rail on the table to the back rail on the table (about 3 inches) it's off by 7 thou. Phil Do you have a .003 shim? - Don
Forum Rules