I know over the last year I have learned a lot of things. How to do it the hard way and how to do it the easy way. I wanted to start a thread were everyone can come and share their Tips, Tricks and Jigs. I have seen a lot from how to turn down lead-screws using a angle grinder to making your own nuts. This thread doesn't have to be just for making a cnc. Some woodwork, metalwork and have interesting hobbies that some would never try because a part of it looks to hard to attempt.
If you decide to participate I would just ask that you explain how you learned this technique, how it helped you and a few pictures.
I will try and keep a list on the first post with the Tip,Trick or Jig and what post number it is at. I don't know how long or how many times I can edit this post so I will try my best to keep a list somewhere in the thread.
-------------------------------------------------------------------------
1. Turndown Lead screw ends with a router Post #2
2. Easy Layout Post #3
3. Spade Bits in Aluminum do work Post #4