Could I use a usb port to upload and download programs on my new pci linux Ajax control. The screen still has F1 F2 F3 for the floppy, hard drive or rs232 but I didnt see anything for usb. Terry
Could I use a usb port to upload and download programs on my new pci linux Ajax control. The screen still has F1 F2 F3 for the floppy, hard drive or rs232 but I didnt see anything for usb. Terry
Terry,
The current Linux setup is not configured for a USB drive. The Windows version will be able to use a USB interface. The Windows version should be released by the end of the month. Mid July at the latest.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Yes the upgrade now supports usb. You need to get the udate files form ajax
Just some info
IF ITS NOT BROKE YOUR NOT TRYING HARD ENOUGH
Ashes to ashes , dust to dust , If it wasnt for Harleys the fast lane would rust.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Looking For Info On Setting Up The Usb
Have Installed The Upgrade And Due To Working My Day Job None Stop
Have Not Had Time To Call Ajax
Can Any One Help Me Get The System To See The Usb To Laod New Programs?
Thanks Brad
IF ITS NOT BROKE YOUR NOT TRYING HARD ENOUGH
Ashes to ashes , dust to dust , If it wasnt for Harleys the fast lane would rust.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I'd be willing to call and research it for you! Can you give me some more info?